Next Chapter | Previous Chapter | Contents | Index
Like most assemblers, each NASM source line contains (unless it is a macro, a preprocessor directive or an assembler directive: see chapter 4 and chapter 5) some combination of the four fields
label: instruction operands ; comment
As usual, most of these fields are optional; the presence or absence of any combination of a label, an instruction and a comment is allowed. Of course, the operand field is either required or forbidden by the presence and nature of the instruction field.
NASM uses backslash (\) as the line continuation character; if a line ends with backslash, the next line is considered to be a part of the backslash-ended line.
NASM places no restrictions on white space within a line: labels may
have white space before them, or instructions may have no space before
them, or anything. The colon after a label is also optional. (Note that
this means that if you intend to code
Valid characters in labels are letters, numbers,
The instruction field may contain any machine instruction: Pentium and
P6 instructions, FPU instructions, MMX instructions and even undocumented
instructions are all supported. The instruction may be prefixed by
An instruction is not required to use a prefix: prefixes such as
In addition to actual machine instructions, NASM also supports a number of pseudo-instructions, described in section 3.2.
Instruction operands may take a number of forms: they can be registers,
described simply by the register name (e.g.
For x87 floating-point instructions, NASM accepts a wide range of syntaxes: you can use two-operand forms like MASM supports, or you can use NASM's native single-operand forms in most cases. For example, you can code:
fadd st1 ; this sets st0 := st0 + st1
fadd st0,st1 ; so does this
fadd st1,st0 ; this sets st1 := st1 + st0
fadd to st1 ; so does this
Almost any x87 floating-point instruction that references memory must
use one of the prefixes
Pseudo-instructions are things which, though not real x86 machine
instructions, are used in the instruction field anyway because that's the
most convenient place to put them. The current pseudo-instructions are
DB
db 0x55 ; just the byte 0x55
db 0x55,0x56,0x57 ; three bytes in succession
db 'a',0x55 ; character constants are OK
db 'hello',13,10,'$' ; so are string constants
dw 0x1234 ; 0x34 0x12
dw 'a' ; 0x61 0x00 (it's just a number)
dw 'ab' ; 0x61 0x62 (character constant)
dw 'abc' ; 0x61 0x62 0x63 0x00 (string)
dd 0x12345678 ; 0x78 0x56 0x34 0x12
dd 1.234567e20 ; floating-point constant
dq 0x123456789abcdef0 ; eight byte constant
dq 1.234567e20 ; double-precision float
dt 1.234567e20 ; extended-precision float
RESB
For example:
buffer: resb 64 ; reserve 64 bytes wordvar: resw 1 ; reserve a word realarray resq 10 ; array of ten reals ymmval: resy 1 ; one YMM register
INCBIN
例：
incbin "file.dat" ; file.dat全体を挿入
incbin "file.dat",1024 ; file.dat先頭1024byte以降を挿入
incbin "file.dat",1024,512 ; file.dat先頭1024byte以降から512byte分を挿入
EQU EQUは指定したシンボルを定数として宣言します。
EQUで指定した定義は絶対的なものであり、再定義できません。
使用例： message db 'hello, world' msglen equ $-message
この例では、msglenは定数12となります。これ以降msglenは再定義できません。
($の説明に関してはsection3.5を参照)
TIMES TIMES に続いて、繰り返し回数と繰り返す命令を指定することによって、命令が回数分展開されます。
TIMESを使用することで、NASMのDUPと同様のことができます。
例： zerobuf: times 64 db 0 ;64byte分の領域を確保し0で初期化
このほかにも、下記のような使用方法も可能です。
buffer: db 'hello, world' ;文字列の領域を確保
times 64-$+buffer db ' ' ;バッファサイズが64byteとなるよう空白領域を確保
このほか、通常の命令にもTIMESが使用できます。
times 100 movsb ;movsb命令×100回分に展開される
Note that there is no effective difference between
The operand to
Note also that
An effective address is any operand to an instruction which references memory. Effective addresses, in NASM, have a very simple syntax: they consist of an expression evaluating to the desired address, enclosed in square brackets. For example:
wordvar dw 123
mov ax,[wordvar]
mov ax,[wordvar+1]
mov ax,[es:wordvar+bx]
Anything not conforming to this simple system is not a valid memory
reference in NASM, for example
More complicated effective addresses, such as those involving more than one register, work in exactly the same way:
mov eax,[ebx*2+ecx+offset]
mov ax,[bp+di+8]
NASM is capable of doing algebra on these effective addresses, so that things which don't necessarily look legal are perfectly all right:
mov eax,[ebx*5] ; assembles as [ebx*4+ebx]
mov eax,[label1*2-label2] ; ie [label1+(label1-label2)]
Some forms of effective address have more than one assembled form; in
most such cases NASM will generate the smallest form it can. For example,
there are distinct assembled forms for the 32-bit effective addresses
NASM has a hinting mechanism which will cause
However, you can force NASM to generate an effective address in a
particular form by the use of the keywords
The form described in the previous paragraph is also useful if you are trying to access data in a 32-bit segment from within 16 bit code. For more information on this see the section on mixed-size addressing (section 9.2). In particular, if you need to access data with a known offset that is larger than will fit in a 16-bit value, if you don't specify that it is a dword offset, nasm will cause the high word of the offset to be lost.
Similarly, NASM will split
In 64-bit mode, NASM will by default generate absolute addresses. The
NASM understands four different types of constant: numeric, character, string and floating-point.
A numeric constant is simply a number. NASM allows you to specify
numbers in a variety of number bases, in a variety of ways: you can suffix
Numeric constants can have underscores (
Some examples:
mov ax,100 ; decimal
mov ax,0a2h ; hex
mov ax,$0a2 ; hex again: the 0 is required
mov ax,0xa2 ; hex yet again
mov ax,777q ; octal
mov ax,777o ; octal again
mov ax,10010011b ; binary
mov ax,1001_0011b ; same binary constant
A character string consists of up to eight characters enclosed in either
single quotes (
The following escape sequences are recognized by backquoted strings:
\' single quote (')
\" double quote (")
\` backquote (`)
\\ backslash (\)
\? question mark (?)
\a BEL (ASCII 7)
\b BS (ASCII 8)
\t TAB (ASCII 9)
\n LF (ASCII 10)
\v VT (ASCII 11)
\f FF (ASCII 12)
\r CR (ASCII 13)
\e ESC (ASCII 27)
\377 Up to 3 octal digits - literal byte
\xFF Up to 2 hexadecimal digits - literal byte
\u1234 4 hexadecimal digits - Unicode character
\U12345678 8 hexadecimal digits - Unicode character
All other escape sequences are reserved. Note that
Unicode characters specified with
db `\u263a` ; UTF-8 smiley face
db `\xe2\x98\xba` ; UTF-8 smiley face
db 0E2h, 098h, 0BAh ; UTF-8 smiley face
A character constant consists of a string up to eight bytes long, used in an expression context. It is treated as if it was an integer.
A character constant with more than one byte will be arranged with little-endian order in mind: if you code
mov eax,'abcd'
then the constant generated is not
String constants are character strings used in the context of some
pseudo-instructions, namely the
A string constant looks like a character constant, only longer. It is treated as a concatenation of maximum-size character constants for the conditions. So the following are equivalent:
db 'hello' ; string constant
db 'h','e','l','l','o' ; equivalent character constants
And the following are also equivalent:
dd 'ninechars' ; doubleword string constant
dd 'nine','char','s' ; becomes three doublewords
db 'ninechars',0,0,0 ; and really looks like this
Note that when used in a string-supporting context, quoted strings are
treated as a string constants even if they are short enough to be a
character constant, because otherwise
Floating-point constants are acceptable only as arguments to
Floating-point constants are expressed in the traditional form: digits,
then a period, then optionally more digits, then optionally an
Underscores to break up groups of digits are permitted in floating-point constants as well.
Some examples:
db -0.2 ; "Quarter precision"
dw -0.5 ; IEEE 754r/SSE5 half precision
dd 1.2 ; an easy one
dd 1.222_222_222 ; underscores are permitted
dd 0x1p+2 ; 1.0x2^2 = 4.0
dq 0x1p+32 ; 1.0x2^32 = 4 294 967 296.0
dq 1.e10 ; 10 000 000 000.0
dq 1.e+10 ; synonymous with 1.e10
dq 1.e-10 ; 0.000 000 000 1
dt 3.141592653589793238462 ; pi
do 1.e+4000 ; IEEE 754r quad precision
The 8-bit "quarter-precision" floating-point format is sign:exponent:mantissa = 1:4:3 with an exponent bias of 7. This appears to be the most frequently used 8-bit floating-point format, although it is not covered by any formal standard. This is sometimes called a "minifloat."
The special operators are used to produce floating-point numbers in
other contexts. They produce the binary representation of a specific
floating-point number as an integer, and can use anywhere integer constants
are used in an expression.
For example:
mov rax,__float64__(3.141592653589793238462)
... would assign the binary representation of pi as a 64-bit floating
point number into
mov rax,0x400921fb54442d18
NASM cannot do compile-time arithmetic on floating-point constants. This is because NASM is designed to be portable - although it always generates code to run on x86 processors, the assembler itself can run on any system with an ANSI C compiler. Therefore, the assembler cannot guarantee the presence of a floating-point unit capable of handling the Intel number formats, and so for NASM to be able to do floating arithmetic it would have to include its own complete set of floating-point routines, which would significantly increase the size of the assembler for very little benefit.
The special tokens
%define Inf __Infinity__
%define NaN __QNaN__
dq +1.5, -Inf, NaN ; Double-precision constants
NASMには2つの特別なシンボル($、$$)があります。
$はそれが使用された行の先頭アドレスを意味します。
$$はそれが使用されたセクションの先頭を意味します。
使用例： jmp $ ;無限ループ jmp ($-$$) ;セクション先頭へジャンプ
| The
^
&
<< >>
+ - The
* / // % %%
NASM, like ANSI C, provides no guarantees about the sensible operation of the signed modulo operator.
Since the
+ - ~ ! SEG The highest-priority operators in NASM's expression grammar are those
which only apply to one argument.
SEG WRT When writing large 16-bit programs, which must be split into multiple
segments, it is often necessary to be able to refer to the segment part of
the address of a symbol. NASM supports the
The
mov ax,seg symbol
mov es,ax
mov bx,symbol
will load
Things can be more complex than this: since 16-bit segments and groups
may overlap, you might occasionally want to refer to some symbol using a
different segment base from the preferred one. NASM lets you do this, by
the use of the
mov ax,weird_seg ; weird_seg is a segment base
mov es,ax
mov bx,symbol wrt weird_seg
to load
NASM supports far (inter-segment) calls and jumps by means of the syntax
call (seg procedure):procedure
call weird_seg:(procedure wrt weird_seg)
(The parentheses are included for clarity, to show the intended parsing of the above instructions. They are not necessary in practice.)
NASM supports the syntax
To declare a far pointer to a data item in a data segment, you must code
dw symbol, seg symbol
NASM supports no convenient synonym for this, though you can always invent one using the macro processor.
STRICT When assembling with the optimizer set to level 2 or higher (see
section 2.1.22), NASM will use
size specifiers (
push dword 33
is encoded in three bytes
push strict dword 33
is encoded in six bytes, with a full dword immediate operand
With the optimizer off, the same code (six bytes) is generated whether
the
Although NASM has an optional multi-pass optimizer, there are some expressions which must be resolvable on the first pass. These are called Critical Expressions.
The first pass is used to determine the size of all the assembled code and data, so that the second pass, when generating all the code, knows all the symbol addresses the code refers to. So one thing NASM can't handle is code whose size depends on the value of a symbol declared after the code in question. For example,
times (label-$) db 0
label: db 'Where am I?'
The argument to
times (label-$+1) db 0
label: db 'NOW where am I?'
in which any value for the
NASM rejects these examples by means of a concept called a critical
expression, which is defined to be an expression whose value is
required to be computable in the first pass, and which must therefore
depend only on symbols defined before it. The argument to the
Critical expressions can crop up in other contexts as well: consider the following code.
mov ax,symbol1
symbol1 equ symbol2
symbol2:
On the first pass, NASM cannot determine the value of
NASM avoids this problem by defining the right-hand side of an
There is a related issue involving forward references: consider this code fragment.
mov eax,[ebx+offset]
offset equ 10
NASM, on pass one, must calculate the size of the instruction
Note that use of the
NASM gives special treatment to symbols beginning with a period. A label beginning with a single period is treated as a local label, which means that it is associated with the previous non-local label. So, for example:
label1 ; some code
.loop
; some more code
jne .loop
ret
label2 ; some code
.loop
; some more code
jne .loop
ret
In the above code fragment, each
This form of local label handling is borrowed from the old Amiga
assembler DevPac; however, NASM goes one step further, in allowing access
to local labels from other parts of the code. This is achieved by means of
defining a local label in terms of the previous non-local label:
the first definition of
label3 ; some more code
; and some more
jmp label1.loop
Sometimes it is useful - in a macro, for instance - to be able to define
a label which can be referenced from anywhere but which doesn't interfere
with the normal local-label mechanism. Such a label can't be non-local
because it would interfere with subsequent definitions of, and references
to, local labels; and it can't be local because the macro that defined it
wouldn't know the label's full name. NASM therefore introduces a third type
of label, which is probably only useful in macro definitions: if a label
begins with the special prefix
label1: ; a non-local label
.local: ; this is really label1.local
..@foo: ; this is a special symbol
label2: ; another non-local label
.local: ; this is really label2.local
jmp ..@foo ; this will jump three lines up
NASM has the capacity to define other special symbols beginning with a
double period: for example,