The function of MPC can be assigned to MIDI NOTE/CC
and MPC can be operated by a MIDI controller. | A function is assigned to MIDI NOTE/CC. |
The function of MPC can be assigned to MIDI NOTE/CC
and MPC can be operated by a MIDI controller.
If F5 (BUTTON) button is pressed in the screen of MIDI/SYNC, it
will become the mode which assigns the function of MPC to MIDI
NOTE/CC.
Please turn ON the Input field.
When "1" is select, the function of MPC
can be operated by the MIDI controller connected to "1"
of a MIDI IN terminal.
When "2" is select, the function of MPC can be operated
by the MIDI controller connected to "2" of a MIDI IN
terminal.
Please select the channel to set.
The assigned function will work, when NOTE or CC
of a channel selected here is received.
Please choose the note or cc which assigns a
function in the note or cc field.
Please move the cursor to the right of the note or
cc, and select the function to assign.
You can select the following functions.
| NOTE 0-127 | OFF | It works as NOTE. |
| PLAY START, PLAY, STOP, OVER DUB, REC BAR, STEP, CURSOR, MAIN, WINDOW, UNDO SHIFT, TAP TEMPO, MODE, ERASE, FULL LEVEL 16 LEVELS, NEXT SEQ, TRACK MUTE, BANK A - BANK D, F1 - F6, AFTER |
If NOTE ON is received, it works the same as the selected button. | |
| SLIDER, LOAD, SAVE, TRACK MIXER,
RECORD TRIM, PROGRAM, PAD MIXER, MIDI/SYNC, OTHER EFFECT, SEQ EDIT, STEP EDIT, GRID, SONG |
If NOTE ON is received, it will go to the mode selected. | |
| PAD_01-PAD_16 | The pad selected when NOTE ON was
received is turned on. The pad selected when NOTE OFF was received is turned off. |
|
| TRACK01 - TRACK16 | If NOTE ON is received, an active track will change into the selected track. | |
| TRK 01 MUTE-TRK 16 MUTE | If NOTE ON is received, it will mute
the selected track. If NOTE OFF is received, it will be unmute. |
|
| TRK 01 SOLO - TRK 16 SOLO | If NOTE ON is received, the selected
track is made into a solo. If NOTE OFF is received, it will be unsolo |
|
| NUMERIC 0 - NUMERIC 9 NUMERIC +, NUMERIC -, NUMERIC ENTER (There is not this selection in MPC1000) |
If NOTE ON is received, it works the same as the selected button. | |
| DATA + | If NOTE ON is received, it works the same as turning a DATA wheel to the right. | |
| DATA - | If NOTE ON is received, it works the same as turning a DATA wheel to the left. | |
| CC#0-127 | OFF | It works as CC. |
| START, PLAY, STOP, OVER DUB, REC,UNDO BANK A - BANK D |
When 64 or more values of CC are received, it works the same as the selected button. | |
| REC+PLAY | When 64 or more values of CC are
received, it works as the same when you press the REC button and the PLAY button simultaneously |
|
| REC+START | When 64 or more values of CC are
received, it works as the same when you press the REC button and the PLAY START button simultaneously |
|
| DUB+PLAY | When 64 or more values of CC are
received, it works as the same when you press the OVER DUB button and the PLAY button simultaneously |
|
| DUB+START | When 64 or more values of CC are
received, it works as the same when you press the OVER DUB button and the PLAY START button simultaneously |
|
| Q1SLIDER-Q4SLIDER (Q3 and Q4 are not in MPC1000.) |
A value also changes according to the value of CC. | |
| PAD_01-PAD_16 | The pad selected when 64 or more
values of CC were received is turned on. The pad selected when 63 or less value of CC was received is turned off. |
|
| DATA+/-?DATA-/+ (Ver.2.xx) | Please select when using Jog such as
DJ controller as jog. Please select the one that works normally. |
After setting, the contents of a setting are
memorized by the system by pressing the [MAIN] button.
If F6 (CLEAR) button is pressed, all the
settings will be returned at OFF.
When the Input field is OFF, it works as a
note/cc.