| Global Program Edit |
In the mode of [MODE]+PAD7,
a setup of PROGRAM, MXER, and EFFECT can be performed globally.
Note
[REC] and the [OVER DUB] button do not work in the mode of Global
Program Edit.
If [REC] or the [OVER DUB] button is pushed, it will return to a
main screen. (INST is also the same)
| 1 | Selected track number |
| 2 | Set program |
| 3 | Type of a program (DRUM/INST) |
| 4 | POLY: Two or more notes can be
pronounced simultaneously. MONO: Two or more notes are not pronounced simultaneously. (Only one note is pronounced.) |
Basic operation in case the type
of a program is DRUM
If the 
cursor button is pressed, cursor will move to the
parameter field.
If the [SHIFT]+
cursor button is pressed, cursor will move to the
Program field.
The value of a parameter will be copied if the or cursor button is pressed pressing a pad.
(It is possible even if it uses a [UNDO] + or button.)
For example, when you want to copy "Sample01"
of A01 to A05 from A02 in the state of the above figure
If cursor is moved to A05 by cursor button, pressing PAD1, the sample of A01 will
be copied from A02 to A05.
Moreover, if cursor is moved to A01 by cursor button, pressing
PAD5 in the state of the above figure, the result of the
following figure will be obtained.
The value of TUNEof A05 is copied to A04-A01.
If the cursor button is pressed, pressing the [SHIFT]
button, two or more pads can be chosen.
For example, if cursor is moved to A06 by cursor button, pressing
the [SHIFT] button in the state of the above figure, the result
of the following figure will be obtained.
When you cancel two or more selections of a
pad, please press F6 (ALL) button, pressing the [SHIFT] button.
If F6 (ALL) button is pressed,
pressing the [SHIFT] button, the value of the parameter of all
the pads can be changed at the same time.
If F6 (ALL) button is pressed, pressing the
[SHIFT] button in the state of the above figure, it will become
ALL mode as shown in the following figure.
When you cancel ALL mode, please press F6 (ALL)
button, pressing the [SHIFT] button.
If a pad is hit pressing the [UNDO] button,
the value on cursor will be copied to the hit pad.
If PAD3 and PAD5 are hit pressing the [UNDO]
button in the state of the above figure, the result of the
following figure will be obtained.
"Sample01" of A01 is copied to
A03 and A05.
If a pad is hit pressing the [UNDO] button
when cursor is in the PAD field, it will be copied to the pad
which the value of all the parameters of the pad on cursor hit.
If PAD5 is hit pressing the [UNDO] button
in the state of the above figure, the result of the following
figure will be obtained.
All the values of the parameter of A01
are copied to A05. (Copy of a pad)
When SHIFT+F1(HOLD) button is on, cursor
does not move automatically by midi in note.