Regardless of the position of cursor, change of a track can be performed by a DATA wheel, holding MODE button.
Regardless of the position of cursor, change of a sequence can be performed by a DATA wheel, holding the [NEXT SEQ] button. (It cannot do during recording and playback)
Selection of a track can be performed if pad is hit holding SHIFT button.
For example, a track 12 will be select if PAD12 is hit holding SHIFT button (in the case of BANK A)
When LOOP is set, if the [PLAY START] button is pressed, it will play from the first bar of a loop.
When the [PLAY START] button is pressed, holding the [STOP] button, it play from a bar 1.
Regardless of the position of cursor, cursor moves to the level field of a mixer by a [SHIFT] +
cursor key.Regardless of the position of cursor, cursor moves to the sequence field or LOOP field by a [SHIFT] +
cursor key.Regardless of the position of cursor, cursor moves to the Ptrn field or EQ field by a [SHIFT] +
cursor key.Regardless of the position of cursor, cursor moves to the track number field or the THRU field by a [SHIFT] +
cursor key.Q-Link slider will not work, if the AFTER key is not ON (the LED is lit).
Moreover, please turn OFF (the LED is turned off) the AFTER key, when the sequence on which note variation data is recorded is playback.
The name into which New Program name was edited at the last is displayed by a default.