Pad mode

When a pad is hit, CC (control change) or PC (program change) other than NOTE can be outputted.

Please turn ON the MIDI field and move cursor to the NOTE field.

If the WINDOW button is pressed, the window of "Pad to MIDI out" will open.

Please move the cursor to the type field and select the message to output.

About CC and PC, it is outputted only on a main screen.
In other modes, NOTE is outputted irrespective of setting.

If a pad A01 is hit in the case of the above figure, a control change 11 will be outputted with the value of 127.

In this case, if a pad A01 is pressed, a control change 11 will be outputted with a value 127, and if a pad is released, it will be outputted with a value 0.

If PRESSURE is select, a value is controllable by the pressure of a pad.

When the F2 (RESET) button is pressed, the "Reset pad to note assign" window open.

If F5 (DO IT) button is pressed, all the setup will return to a default.

The program has memorized a setting in this window.
Therefore, when you want to save this setting, please save a program.