| AUDIO TRACK |
Tracks 57-64 are audio tracks.
A sample is
assign to a track and can play back.
If you press the [REC]+[PLAY]
or [PLAY START] key of can record.

Track 57 - 64 main screens.

Track 1- 56 main
screens.

A main screen when the [SHIFT] key is pressed
Playing back a Sample

Please move cursor to the sample field.
Please select a sample to playback by a data wheel.
Selection of a sample can also be select from the window of
"Sample list".
Playback of a sample will be begun if [PLAY]
or the [PLAY START] key is pressed.
When the [PLAY] key
is pressed, playback can be begun from the present location.
If the [STOP] key is pressed, playback will stop.
If the [WINDOW] key is pressed when cursor
is in the sample field, the window of "Sample list"
will open.

Playback is begun by
the [PLAY START] key.

[STOP] key was pressed in the location of
003.02.40
![]()

If the [PLAY] key is pressed, playback will be begun from 003.02.40.
Audition of samples

An audition of the sample chosen if arbitrary pads are pressing
is possible.
Moreover, even if it chooses a sample by a DATA wheel or
or
cursor key, pressing a arbitrary pad, audition is
Possible.

When cursor is a FX field, press the [WINDOW] key, the "EFFECTT"
window will open.
![]()

Preparing the recording

Please move cursor to the track field and press the [WINDOW] key,
the window of "Record setups" will open,
![]()

| Input: | Select the recording sourec. |
| Mode: | Select the recording mode. (STEREO or MONO) |
| Name: | Sample name. (Default is "Take01.02.....") |
| Monitor: | Monitor ON/OFF under recording. |
| MONO: | Time which can be recorded by a monophonic recording. |
| STEREO: | Time which can be recorded by a stereo recording. |
Starting the recording

When the [REC]+[PLAY START] key is pressed, recording is started
from 001.01.00 (00:00:00:00).

In [REC]+[PLAY], recording is started from the present location.
In this case, silence is recorded from 001.01.00 to the present location.
In the case of the above figure, recording
is started from the location of 003.01.00, and silence is
recorded to 001.01.00 to 003.01.00.
Notes
When the loop of a sequence is ON, recording is automatically
stopped at the end of a sequence.
When a loop is OFF, the recording will continue until you press
the [STOP] key.
And the number of the bar when you actually pressed the [STOP]
key will be set as the new length for the sequence.
[OVER DUB] key does not work.
Moreover, it cannot go to other screens during recording.
The program has the parameter of Q-Link.
There is no program in an audio track.
Therefore, Q-Link does not work in an audio track.
Audio track is can
not convert in song mode.