| GLOBAL PROGRAM EDIT |
On the screen of [MODE]+PAD11, a setup of PROGRAM,
MXER, and EFFECT can be carried out collectively.

Cursor move to Pgm field
please press the [SHIFT]+
cursor key.
![]()

Please press the
cursor key, for returning
from the Pgm field to the PAD field and the parameter field.
![]()

Cursor movement of
the parameter field please press the
or
cursor key.
If a DATA wheel is turned holding the
or
cursor key, it can move quickly.

Press the F6[WHOLE]
key will display a pad number on F4 and F5 key.
Holding F4 key, please turn a DATA wheel and choose the pad
number used as the starting point of the range.
Holding F5 key, please turn a DATA wheel and choose the pad
number used as the end point of the range.

When cursor is a PAD
field, press the [WINDOW] key, the "Velocity Layer"
window will open.
![]()

Press the F2[WHOLE]
key will display a pad number on F3 and F4 key.
![]()

Holding F3 key, please turn
a DATA wheel and choose the pad number used as the starting point
of the range.
Holding F4 key, please turn a DATA wheel and choose the pad
number used as the end point of the range.

When cursor is a
NOTE field, press the [WINDOW] key, the "Pad to Note Assign"
window will open.
![]()

Press the F3[35-98]
key will assign 35-98 of NOTE in order to A01-D16 of a pad.
![]()


When cursor is a
SAMPLE field, press the [WINDOW] key, the "Sample list"
window will open.
![]()

An audition of the sample
chosen if arbitrary pads are pressing is possible.
Moreover, even if it chooses a sample by a DATA wheel or ![]()
cursor key, pressing a arbitrary pad,
audition is Possible.
Auto Chromatic
Assign

When cursor is a TUNE field,
press the [WINDOW] key, the "Auto Chromatic Assign"
window will open.
![]()

Press F5[DO IT] key.
![]()

F2[FILTER]

When cursor is a ATK,DCY,MODE
field, press the [WINDOW] key, the "Amp Envelope"
window will open.
![]()


When cursor is a FLT1-RES2
field, press the [WINDOW] key, the "Filter Envelope"
window will open.
![]()

F3[LFO]

F4[MUTE]

A setup of Mute group and Simult
pad.
F5[OUT]

OUT can
choose ST-12-34-1-2-3-4-L-R.

Press the [WINDOW] key.
![]()


Press the [WINDOW] key.
![]()
