<Explanation in OVER DUB=ON >
If F2 (Q-REAL) key is pressed, it will become the mode which edits the REAL TIME event of Q-Link.
Since cursor will be displayed on the upper field if the
cursor key is pressed,
please choose a pad number and a parameter to edit or record.If the
cursor
key is pressed, cursor disappears from the upper field and a
marker can be moved by a DATA wheel.Record of an event is performed with Q1 and Q2 slider.
OVER DUB is ON(the LED is lit)
Please move a marker to the location which records edit or an event, and edit or record an event by a slider.
If an event is recorded, the value of the event will be displayed on the upper EVENT field.
Record of an event is also recordable on real time, if [REC], [OVER DUB]+[PLAY], or the [PLAY START] key is used.
Even if it records by [REC]+[PLAY] or [PLAY START], only the parameter event of the pad number chosen now is erased.
NOTE event is not erased.
[AUTO INSERT]
The procedure which records two or more events at one time.
Please select the region which records an event by a [TAP TEMPO] + DATA wheel.
Next, please press the F5(INSERT) key.
A default value is inserted.
Please set the value of start with Q1 slider.
Please set the value of end with Q2 slider.
The event from the value of a start to the value of an end is inserted for every clock set at the interval.
Selection of an interval.
F2(1/8) = 48clock, F3(1/16) = 24clock, F4(1/32) = 12clock.
Insertion will be completed if F6 (ENTER) key is pressed.
Notes:
LOW and HIGT which were set on MODE+PAD1 (SLIDER) mode do not work on grid( Q-REAL) mode.
Moreover, AFTER does not work, either.