As fundamental specification, if OVER DUB is not ON, execution of "INSERT, DELETE, PASTE, EDIT, MOVE" cannot be performed.
Moreover, these function keys are not displayed, either.

[OVER DUB=OFF]



If the cursor key is pressed, holding a [SHIFT] key, cursor will be displayed on the upper field.
If set in the upper field finishes, please press the cursor key.
or cursor key can go up and down the display range of NOTE.
If F3(ALL) key is pressed, all the notes (0-127) will be displayed.
Move of bar can be performed if the < BAR > key is pressed. Move quickly by a DATA wheel, holding the < BAR > key.
If the F4 (PC) key is pressed, a program change will be displayed on the upper field.


PC:OFF:Pgm:xxxxxxx = Internal sound program name
PC:Seq:nnn:xxxxxxx = MIDI Seq. event program name
PC:nnn:xxxxxxx = Track parmeter program name


ON/OFF of a loop is [SHIFT]+F6 (LOO) key.

[OVER DUB=OFF or ON]


It is SHIFT+F3 (ZOOM OUT) and is zoom out.


It is SHIFT+F4(ZOOM IN) and is zoom in.

[OVER DUB=ON]




OVER DUB is ON(the LED is lit)
When a marker is on an event, the parameter of the event is displayed on the upper field.
When two or more events are in the same location, please choose an event by a or cursor key.




When Q1 [AFTER] is ON (the LED is lit), the value of duration can be set with a slider.
When Q2 [AFTER] is ON (the LED is lit), the value of velocity can be set with a slider.


If F5 (EDIT) key is pressed, it will become the edit mode of a parameter.
Please move cursor to the parameter to edit, and please set a value by a DATA wheel.
Edit mode will be canceled, if F5(EDIT) key is pressed once again or the cursor key is pressed.

Record of events


OVER DUB is ON(the LED is lit)
Please turn ON(the LED is lit) Q1 [AFTER] and set the value of duration with a slider.
Please turn ON(the LED is lit) Q2 [AFTER] and set the value of velocity with a slider.
If a keyboard or a pad is hit, the event of the value set by Q1 and Q2 will be recorded on the position of a marker.
When the [AFTER] key is OFF, an event is recorded as AS PLAYED.

<<PITCH BEND, CONTROL CHANGE, POLY PRESS, CHANNEL PRESS, EDIT MODE>>


If F2 (CONTROL) key is pressed, it will become the edit mode of PITCH BEND, CONTROL CHANGE, POLY PRESS, and CHANNEL PRESS.




The parameter field will be highlight if the cursor key is pressed.
Please choose the parameter to edit by a DATA wheel.
Please press the cursor key after pressing the cursor key, if the parameter to edit is chosen.


OVER DUB is ON(the LED is lit)
Please move a marker to the location which records edit or an event, and edit or record an event by a slider.
If an event is recorded, the value of the event will be displayed on the upper EVENT field.
Record of an event is also recordable on real time, if [REC], [OVER DUB]+[PLAY], or the [PLAY START] key is used.
Even if it records by [REC]+[PLAY] or [PLAY START], only the parameter event of the pad number chosen now is erased.
NOTE event is not erased.
In the case of the upper picture, the event of new PITCH BEND is recorded, erasing only the event of PITCH BEND of a track 3.

<<AUTO INSERT>>

The procedure which records two or more events at one time.


Please select the region which records an event by a [TAP TEMPO] + DATA wheel.
Next, please press the F5(INSERT) key.


A default value is inserted.
Please set the value of start with Q1 slider.
Please set the value of end with Q2 slider.


The event from the value of a start to the value of an end is inserted for every clock set at the interval.

Selection of an interval.
F2(1/8) = 48clock, F3(1/16) = 24clock, F4(1/32) = 12clock.
Insertion will be completed if F6 (ENTER) key is pressed.