This manual is written only
about the function added by JJ OS.
Please refer to the manual of AKAI for the basic function of MPC.
change OS, please switch on a power supply, pressing the ERASE
Please press the ERASE button until a main screen is displayed.
If this operation is not performed, MPC may freeze or it may
When the reaction of a DATA
wheel is slow or cannot change the value of one step,
please change the set of the "Data Wheel Type"
field of OTHER.
Usually, MPC in which Ver2.12 or less AKAI OS was
installed selects 1.
MPC in which Ver2.13 was installed selects 2.
If OS is changed,
this set will return to default setting"2".
video of user offer.
The contrast of LCD should turn a DATA wheel, pressing
the [STOP] key.
If a DATA wheel is turned pressing [SHIFT] or the [TAP
change of a value will increase 10 times.
Those who exchanged the pad for a new pad or are
using MPC1000 BK-N need to adjust pad sensitivity first.
Please push the [MAIN] key before turning off the power.
Various data is memorized by the internal Flash memory by
pressing a [MAIN] key.