This manual is written only
about the function added by JJ OS.
Please refer to the manual of AKAI for the basic function of MPC.
change OS, please switch on a power supply, pressing the ERASE
Please press the ERASE button until a main screen is displayed.
If this operation is not performed, MPC may freeze or it may crash.
When you install OS2 for the first time, please perform sensitivity adjustment of a pad first.
In addition, if OS is switched, a set will return to a default value..
A tracks cannot be changed during recording.
If OS2 is installed, please adjust the contrast of LCD first.
The contrast of LCD should turn a DATA wheel, pressing the [STOP] key.
If a DATA wheel is turned pressing [SHIFT] or the [TAP TEMPO] key,
change of a value will increase 10 times.
Please press the [MAIN] key before turning off the power.
Various data is memorized by the internal Flash memory by pressing a [MAIN] key.
NOTE REPEAT does not work to MIDI keyboard.
"Track velocity %" is not in OS2.
---About MIDI note number to the pads---
Grid Edit (Drum)
Grid Edit (Midi)
Grid Edit (Audio)
Extra Audio Play (Real-time time stretch and a real-time pitch shift)
Global Program Edit
Song is converted to WAVE (Mix Down)
Sample Layer Crossfade
Real Time Pitch Shift
Midi Program Change
(MMC - MTC - CLOCK)
Save / Load / Auto Load / Format
Recording from CD
Behavior selection of Play Start (LOOP)
Behavior selection of the Next sequence
Customizable Click/Metronome Sounds