A function is assigned to MIDI NOTE/CC.

The function of MPC can be assigned to MIDI NOTE/CC and MPC can be operated by a MIDI controller. (Refer to video)


If F5 (BUTTON) button is pressed in the screen of MIDI/SYNC, it will become the mode which assigns the function of MPC to MIDI NOTE/CC.



Please turn ON the Input field.


When "1" is select, the function of MPC can be operated by the MIDI controller connected to "1" of a MIDI IN terminal.
When "2" is select, the function of MPC can be operated by the MIDI controller connected to "2" of a MIDI IN terminal.



Please select the channel to set.
The assigned function will work, when NOTE or CC of a channel selected here is received.


Please choose the note or cc which assigns a function in the note or cc field.


Please move the cursor to the right of the note or cc, and select the function to assign.


You can select the following functions.

NOTE 0-127 OFF It works as NOTE.
PLAY START, PLAY, STOP, OVER DUB, REC
BAR, STEP, CURSOR, MAIN, WINDOW, UNDO
SHIFT, TAP TEMPO, MODE, ERASE, FULL LEVEL
16 LEVELS, NEXT SEQ, TRACK MUTE,
BANK A - BANK D, F1 - F6, AFTER
If NOTE ON is received, it works the same as the selected button.
SLIDER, LOAD, SAVE, TRACK MIXER, RECORD
TRIM, PROGRAM, PAD MIXER, MIDI/SYNC, OTHER
EFFECT, SEQ EDIT, STEP EDIT, GRID, SONG
LOOPING REC(Looping recorder)
If NOTE ON is received, it will go to the mode selected.
TRACK01 - TRACK16 If NOTE ON is received, an active track will change into the selected track.
TRK 01 MUTE-TRK 16 MUTE If NOTE ON is received, it will mute the selected track.
If NOTE OFF is received, it will be unmute.
TRK 01 SOLO - TRK 16 SOLO If NOTE ON is received, the selected track is made into a solo.
If NOTE OFF is received, it will be unsolo
NUMERIC 0 - NUMERIC 9
NUMERIC +, NUMERIC -, NUMERIC ENTER
If NOTE ON is received, it works the same as the selected button.
This selection is not in MPC2500.
DATA + If NOTE ON is received, it works the same as turning a DATA wheel to the right.
DATA - If NOTE ON is received, it works the same as turning a DATA wheel to the left.
CC#0-127 OFF It works as CC.
START, PLAY, STOP, OVER DUB, REC,UNDO When 64 or more values of CC are received, it works the same as the selected button.
REC+PLAY When 64 or more values of CC are received,
it works as the same when you press the REC button and the PLAY button simultaneously
REC+START When 64 or more values of CC are received,
it works as the same when you press the REC button and the PLAY START button simultaneously
DUB+PLAY When 64 or more values of CC are received,
it works as the same when you press the OVER DUB button and the PLAY button simultaneously
DUB+START When 64 or more values of CC are received,
it works as the same when you press the OVER DUB button and the PLAY START button simultaneously
Q1SLIDER-Q4SLIDER
(Q3 and Q4 are not in MPC1000.)
A value also changes according to the value of CC.
PAD_01-PAD_16 The pad selected when 64 or more values of CC were received is turned on.
The pad selected when 63 or less value of CC was received is turned off.

After setting, the contents of a setting are memorized by the system by pushing the [MAIN] button.

Note: A setting here is given to priority when same CC as the effect and the mixer is allocated.



If F6 (CLEAR) button is pressed, all the settings will be returned at OFF.




When the Input field is OFF, it works as a note/cc.