The level and pan of a mixer are controllable by a MIDI controller.

In the case of the mixer of a pad
A pad is controllable only to A01-A16.

[MODE]+PAD8

If F4 (CC) button is pushed in the mode of MIXER, it will become CC assignment screen of a MIDI controller.


Please turn a DATA wheel and select the mode.


When MULTI CHANNEL mode is select, it is set as follows by fixation.


When CC#7 or CC#10 are set with the effect(FX2), a MIDI controller works to an effect(FX2).
Priority is given to effect(FX2) when the same CC as effect(FX2) is set.
This case, if the MIDI-CC field of an effect(FX2) is turned OFF, a MIDI controller will work in a mixer. (Refer to the following figure)



When NON-CHANNEL mode is select, arbitrary control change numbers can be assigned to a pan and level.
Please set a control change number to each pad in the PanCC# field and the LevCC# field.


In addition, if the knob and slider of a MIDI controller are moved when cursor is in the PanCC# field or the LevCC# field,
the received control change number will be automatically set to the cursor position.

If other CC is assigned or the MIDI CC field of FX2 is turned OFF, a message will not be displayed.
Priority is given to effect(FX2) when the same CC as effect(FX2) is set.

Note: A setup of assigned MIDI CC is memorized by the system by pressing the MAIN button.


Operation of the MIDI controller currently assigned to the mixer of the pad will display "CC PAD MIXER" on the indicator field of a main screen.

Notes
CC currently recorded on the sequence does not work in pad mixer.
Priority is given to pan when the same CC as pan and level is set.
Priority is given to effect(FX2) when the same CC as effect(FX2) is set.

In the case of the mixer of a track
A track is controllable only to track1-16

[MODE]+PAD4

It is controllable if the MIDI field is turned ON.
Moreover, when this is ON, the level of a MIDI sequence and the value of a pan are also reflected.
A channel and the control change number are as follows.
Note: Change of a channel or a control change number cannot be performed.

Note: Priority is given to the mixer of an effect or a pad when the same CC as the mixer of an effect or pad is set.


Operation of the MIDI controller currently assigned to the mixer of the track will display "CC TRK MIXER" on the indicator field of a main screen.