|LFO(Low Frequency Oscilator)|
The effect of a vibrato or a tremolo is
given to the sound of a sample.
|WAVE FORM||Please select the waveform of LFO.
|RATE||You can set the cycle (speed) of the
This setting value is based on the Beat and Tick.
The cycle (speed) will be changed with the tempo of the sequence.
|DELAY||You can set the delay time (the time
before starting the LFO) with the Beat and the Tick. (0.00-99.00)
For example, if you wish to start the LFO after two beat from starting from the point of triggering a sample, set it to "2.00".
|PITCH||You can set a value to change the
pitch of the sample. ( Vibrate effect). (0-100)
The lower this value, the less pitch variation you will get, and vice versa the higher this value, the more pitch variation.
|FILTER||You can set this value to change the
filter of the sample. (WOW effect) (0-100)
The lower this value, the less the WOW becomes, and vice verse.
This parameter works is based upon the setting in the F3(FILTER).
|LEVEL||You can set this value to change the
level of a sample. (Tremolo effect) (0-100)
The lower this value, the less tremoro effect, the larger the value, the more tremoto effect.
|AFTER||The depth of LFO changes by a pressure.
(Only pitch) (0-100)
If this value is high, an effect will be acquired deeply.