Voice Monitor

[MODE]+PAD10(OTHER) =>F1[GLOBAL]


Splash Screen

If the bmp file of the following conditions is in the ROOTof CF card or HDD,
the bmp picture will be displayed at the time of MPC starting.
Please use for the display of a user name, a band name, etc.


Sample file: mpc1000.bmp(3KB)

MUTE


When F5[MUTE] is a highlight, MUTE of the select track is set to ON.

Customizable Click/Metronome Sounds


Please choose the sample of the Accent field and the Normal field in the window of "Click/Metronome".
A sample can be changed on real time.

INTERNAL = sample of INTERNAL
SAMPLE = Loaded sample
Lvl = LEVEL(0-200)

"Shift Timing" is added to the window of "Timing Correct".


Press F3[Q-LINK] key.


Please set up Q-LINK on this screen to perform a setup of "Swing" and "Shift" with a slider.

In the "Keep or Retry" window of RECORD ([MODE]+PAD5), F4 [toPAD] is added.


1. Please move cursor to the pad field.
2. Please select a pad number to assign.
3. Please press the F4[toPAD] key.

Behavior mode of Next sequence.


Please press a [WINDOW] key and open the window of "Sequence".


Cursor is move to the "Next sequence" field and behavior mode is select.
In case of setting in the upper picture, after playing back Sequence to END, it plays back Next sequence.
Moreover, the case of this setup, if the [PLAY START] key is pressed during playbacks, it changes to Next sequence immediately.


In this setup, point in time it changes to Next sequence, playbacks from the beginning of that sequence.


In this setup, Next sequence is playbacks from the position of Now when changing to Next sequence.
Note: Behavior can be changed while playing back a sequence.

USB connection


If it goes into the screen of USB, it will be automatically recognized by PC.
When not recognized, please press the F6 [MOUNT] key.
Note: It can go to the other screens, in the state which connected the USB cable.

TAP TEMPO


The function of tap tempo can be assigned to a pad.
Tap tempo: OFF,TAP TEMPO,PAD1,PAD2,,,,,PAD16
Note No.= Change of the tap tempo by MIDI IN NOTE.

Indicator of a main screen


An indicator is displayed on the upper part of a main screen.

	Send	Receive	stops during receive
MTC
MIDI CLOCK

Input thru(ON)