A pitch shift can be performed on real time. (+ - 1 octave )

[MODE]+PAD8 Screen

Press F5[INPUT] key.


Please make it "Input thru ON" and "Pitch shift ON" on the screen of INPUT.


A pitch shift is possible on real time to the signal from a RECORD IN terminal and a DIGITAL IN terminal. (+ - 1 octave )
If a [REC] key is pressed, the sound by which the pitch shift was carried out can be recorded.
[STOP] or if the [REC] key is pressed once again, recording stops.
When recording is stopped, the contents of recording are kept in the memory of MPC by the file name of "Sample01" (default name).

It can carry out 0 to +1 octave variable by Q1 slider. (+1 to +12 1= half tone )
It can carry out 0 to -1 octave variable by Q2 slider. (-1 to -12 1= half tone )
Range = The variable range of a slider is changed.
Pitch = The present pitch.


When cursor is a Pitch shift field, press the [WINDOW] key, the "Record name" window will open.


When needed, the sample name which it has automatically can be changed.

Notes
1. Q-link sliders cannot be used.

2. It can be used only on an Input Thru screen.
 
3. It does not work on other screens.
 
4. The play of a sequence is not made when pitch shift is ON.
(Since the burden of CPU is heavy).

<<<when there is no password.>>>
It stops being able to carry out variable of the pitch  5 minutes after power on.

Tips

Press the SHIFT+F6[InTHRU] key.