How to Install
Ver3.09 and OS1. ( How to Install OS2 is here 
)1. Download the JJ OS from our website to your computer
2. Insert Compact Flash into MPC1000
3. Switch the MPC1000 on
4. Go Load mode, then press F4(USB)
5. Connect a USB cable between PC to MPC1000 (display will change from "Status=Not Connected" to "Status=Connected")
6. PC will mount the CF card of the MPC1000 as a drive on your computer
7. Please copy OS ("mpc1000_jv***.bin") file to CF card from your computer.
8. Once the file has been copied, disconnect the USB cable
9. Switch the MPC1000 off
10. Turn the power on while pressing down the WINDOW button
11. Press the REC button - the MPC1000 will start processing the update and will then re-boot automatically with the JJ OS