1 bar mode


When F2 (1Bar) button is pressed, it will become 1 bar playback mode.


Pressing the F3 (Velo.<->) button will take you to a screen where you can edit the velocity and shift of the event.


You can edit the velocity and shift of the event on the horizontal marker.
In the above figure, the event for pad A02 within the measure is displayed.
Please choose an event to edit with the or cursor button, and adjust a value by a DATA whell.


Cursor is movable to the shift field with an cursor button.


The value of a shift can be adjusted up to +/-10.


If you want to change the pad event you want to edit, hit the pad you want to edit to select it.
For example, if you hit PAD6 in the above figure state, the A06 event will be displayed.


When the F4 (LOOP OFF) button is ON, you cannot edit the velocity and shift.
If you turn on the F4 (LOOP OFF) button in the state shown above figure , the loop will be turned off and you will return to normal playback mode.



Note
If the track type is other than "DURM", the F3 (Velo.<->) and F5 (SAMPLE) buttons will not be displayed.


If you turn on [OVER DUB], you can enter and erase events while looping, just like in 2-bars mode.



6PAD mode


If F1 (6PAD) button is pressed, it will become 6 pad mode.


Six arbitrary pads are chosen and the enter and erase of events can be performed.
If F2 (PAD SEL) button is pressed, cursor moves to the pad field and can choose arbitrary pads.


Chosen any 6 pads


If F2 (PAD SEL) button or cursor button is pressed, it will return to a previous screen.


Turn on [OVER DUB] and use the up and down cursor buttons to move the cursor to the pad where you want to input an event.


You can also move the cursor using the cursor buttons or the pad.
Moreover, you can also move left and right using the DATA whell.
Move the cursor to the location where you want to enter an event and hit one of the pads from PAD1 to PAD8.
Each pad on this screen has a function assigned to it, so even if you hit a pad you want to enter an event for, the event for that pad will not be enter.
If you hit a pad at a location where an event has been entered, the event will be erased.
Also, by pressing the [PLAY START] or [PLAY] button, you can enter or erase events while looping playback 2 bars.



Press and hold the F1 (6PAD) button to open a window that displays the functions assigned to each pad.

PAD1 to PAD8 are assigned to enter/erase events.
PAD10 and PAD11 are assigned to erase events.
PAD9 and PAD12 are assigned to the cursor button.
PAD13 and PAD16 are assigned to the cursor button.
The cursor button is assigned to PAD14.
The cursor button is assigned to PAD15.