Operation method

When operating it by the foot switch or a MIDI foot controller, it recommends assigning [OVER DUB] and the [PLAY] button.


If the [REC] or [OVER DUB] button is pressed, it will be in the standby state of record.
(When Triggr is set to "0", recording is started immediately)


Recording will be started, if a pad is hit or a signal is inputted. (A performance of pads is also recorded)
As for the sound of the pad, the program chosen with the main screen will be used.


If the [REC] or [OVER DUB] button is pressed during recording, loop playback of the performance which stopped recording and was recorded now will be carried out.
(An overdubbing is carried out when the "Rec" field is "Dub")


An overdubbing will be carried out if the [OVE DUB] button is pressed during loop playback.


If the [OVER DUB] button is pressed into during overdubbing, it will switch into the loop playback.


It will stop, if [PLAY] or the [STOP] button is pressed during an overdubbing or loop playback.


If the [OVER DUB] button is pressed in the state of a stop, it will be in the standby state for carrying out new recording.
Please press the [OVER DUB] button after pressing the [PLAY] button, when you want to carry out an overdubbing from the state of a stop.
If F6 (KEEP) button is pressed, the window of "Keeps as sample" will open.


When you want to make the recorded performance into a sample and to keep it, please set a name and press F5 (KEEP) button.
If F2 (toPAD) button is pressed, it can keep as a sample and can assign to a pad.
Please press F2 (toPAD) button after choosing a pad to assign in the "PAD" field.
Even if selection of a pad hit the pad to assign, it can be chosen.

[PLAY] button performs playback and a stop of a looping recorder. (A stop is possible also by the [STOP] button)
Since the [PLAY START] button is not used, it does not work.

About an undo function
If the [UNDO] button is pressed, the performance data which carried out the overdubbing just before the stop can be deleted.
If the [UNDO] button is pressed again, deleted data will restore.

Note: The time which can be recorded at one time is a maximum of 1 minute.