Q-Link works only on the screen of the main, track mute, and the next sequence.
Moreover, Q-link works only on an active track. (Other OS's are the same)
The program has memorized a setup of Q-link.
Notes
Q-link does not work to MIDI Notes from the outside.
When a multi timbre is ON, Q-Link does not work.
It cannot coexist with 16LEVELS.
Q-Link slider will not work, if the AFTER button is not ON (the LED is lit).
Moreover, when you reproduce the sequence on which the data of Q-link is recorded, please turn OFF (the LED is turned off) the AFTER button.
When the AFTER button is ON (the LED is lit), the data of Q-link currently recorded is not played back.
When the same pad or ALL as two or more Q-link is set, only the parameter set to Q-link of a small number works. (MPC2500)
For example
Q1 Type:TUNE Pad: A01 or ALL
Q2 Type:LPF Pad: A01 or ALL
In this setup, only TUNE of Q1 will work.
LPF of Q2 does not work.
A parameter which is different in the same pad cannot be recorded.
When it records, only the parameter recorded at the end works.
As for the level and pan of a track, the value of a program is changed. (In the case of a pad, the value of a program does not change.)
Pgm field
The program which Q-Link work is displayed.
TYPE field
Please select the type of a parameter which you want to control with a slider.
TUNE
LPF
BPF
HPF
LEVEL
PAN
LFO P (PITCH)
LFO F (FILTER)
LFO L (LEVEL)
LFOpan (PAN)
ATTACK
DECAY
START (The start point of a sample is changed.)
END (The end point of a sample is changed.)
TRANSPOSE
VELOCITY
Tr.LEVEL (Level of a track)
Tr.PAN (Pan of a track)
MIDI CC
Note
In LFO FILTR, when FILITER of a program is OFF, it works as Frequency 80 Resonance 90 of LPF.
Value of a program is used when FILITER of the program is set.
LOW field
Minimum of the variable range of a slider
HIGH field
Maximum of the variable range of a slider
NOW field
Present value
CHANGE field
Select of NOTE ON or REAL TIME
The parameters which use this select are only TUNE, LPF, BPF, HPF, LEVEL, and PAN.
NOTE ON
The setting value of the Q-LINK slider at hitting the pad affects to the sound.
If you change the QLINK slider while the sound is playing back, the sound will not be changed.
REAL TIME
If you change the Q-LINK slider while the sound is playing backs, the sound will be changed.
PAD field
Chosen the pad to which the Q-Link will be applied.
Example of a setting of STRAT
L (Length) field
Length to play is chosen.
Value of NOW is %. (It adjusts what% of location is made a start point from a start point.)
In the case of the above figure, it starts from 25% of location, and play to the end of a sample.
In the case of the above figure, it starts from 25% of location, and only the length of one bar is played.
In the case of the above figure, it starts from 50% of location, and only the length of 1/4 bar is played.
