The effect of a vibrato or a tremolo is given to the sound of a sample.

Wave	Please select the waveform of LFO.
Rate	You can set the cycle (speed) of the LFO. (0.12-99.00) This setting value is based on the Beat and Tick. The cycle (speed) will be changed with the tempo of the sequence.
Delay	You can set the delay time (the time before starting the LFO) with the Beat and the Tick. (0.00-99.00) For example, if you wish to start the LFO after two beat from starting from the point of triggering a sample, set it to "2.00".
AftertouchPitch	The depth of LFO of Pitch changes by a pressure. (0-100) If this value is high, an effect will be acquired deeply.
Pitch	You can set a value to change the pitch of the sample. ( Vibrate effect). (0-100) The lower this value, the less pitch variation you will get, and vice versa the higher this value, the more pitch variation.
Filter	You can set this value to change the filter of the sample. (WOW effect) (0-100) The lower this value, the less the WOW becomes, and vice verse. This parameter works is based upon the setting in the F3(FILTER).
Level	You can set this value to change the level of a sample. (Tremolo effect) (0-100) The lower this value, the less tremoro effect, the larger the value, the more tremoto effect.