MIDI/SYNC

Multi timbre field
It is the field which chooses ON/OFF of a multi timbre. Please refer to a "Multi timber".
Active track receive channel field
It is a field that selects the received MIDI channel.
If you set this field to ALL, the MPC will receive all channels.
If you select any channel from 1 to 16, the MPC will receive only the selected channel.
Soft thru field
The soft thru field determines how to output the incoming MIDI signal.
You can select the following options.
OFF: The MPC will not output the incoming MIDI signal.
AS TRACK: .The MPC refers to the MIDI channel setting of the sequence's track.
The channel information of the incoming MIDI signal will be replaced with the MIDI channel selected the track.
OMNI-A: The MPC will output the incoming MIDI data as it is from MIDI OUT A.
OMNI-B: The MPC will output the incoming MIDI data as it is from MIDI OUT B.
OMNI-C: The MPC will output the incoming MIDI data as it is from MIDI OUT C. (Selection that exists only in MPC2500)
OMNI-D: The MPC will output the incoming MIDI data as it is from MIDI OUT D. (Selection that exists only in MPC2500)
OMNI-AB: The MPC will output the incoming MIDI data as it is from both MIDI OUT A and B.
OMNI-CD: The MPC will output the incoming MIDI data as it is from both MIDI OUT C and D.
(Selection that exists only in MPC2500)
OMNI-ALL: The MPC will output the incoming MIDI data as it is from all of MIDI OUT A, B, C, and D.
(Selection that exists only in MPC2500)
Sequence change by program change field
When this field is set to "ON", MPC can change to a different sequence by MIDI Program Change message from an external MIDI device.
The sequence of the same number as the incoming Program Change number will be selected.
MIDI out after touch field
When this field is set to "YES", the poly pressure will be outputted by the after touch of a pad.
When a program is "INST", a channel pressure is outputted by the after touch of a pad.

About a button

Please refer to "MMC-MTC-CLOCK" for F2 (SYNC).

Please refer to "Pitch Bend Sensitivity (Variable range of Pitch Bend)" for F3 (BEND).

Please refer to "MIDI IN monitor" for F4 (MONITOR).

Please refer to "A function is assigned to MIDI NOTE (MPC is operated by a MIDI controller)" for F5 (BUTTON).

If F6 (SCREEN) button is pressed, it will become a screen of the following figure.

If the Screen shots field is set to "ON", and the [UNDO] button is pushed, the BMP file of a screen will be made and it will be saved to CF card.
This is a function for on-line manual creation.
Therefore, it is not related to the function of MPC.