Explanation in each mode
A hyphen is usual mode.
A sample will be played back if a pad is hit.
You can change the note to output in the "MIDI note out"
field.
If F5 (RESET) button is pressed, "Reset pad to note assign"
window will open.
If F5 (DO IT) button is pressed, all the changed notes will
return to a default note.
Notes
Even if a setup of MIDI
note out saves the file of PAD MODE ASSIGN, it is not memorized.
A setup of MIDI note out is memorized by the program. (Please refer
to "Setting of pads to midi note out".)
PATTERN
If PATTERN is chosen, a pattern will be played back by hitting a
pad.
Please move cursor to the pattern field and choose a pattern.
Please move cursor to the pattern field and choose a pattern.
Please set the value of parameters if needed.
The audition of the pattern chosen by hitting a pad can be
performed.
| Track field |
A pattern is played back
with reference to a setup of the selected track. (A
pattern is played back using the program of the selected
track)
When the track is not select, it is played back with
reference to a setup of an active track.
Recording is
performed to the selected track. |
| Transpose field |
You can transpose the note
used by the pattern. |
| Play mode
field |
LOOP |
A pattern will be repeatedly played
back until a pad is hit once again. |
| ONE |
If a pad is hit, a pattern will be
played back only once.
Moreover, a pattern will be repeatedly played back, while
pressing the pad. |
SOLO
(SOLO LOOP) |
Playback of other patterns is stopped,
and playback of a pattern will be solo repeated until a
pad is hit once again. |
Please refer to "Registration
of patterns" for a pattern.
Notes
A pattern is played back only on a main screen.
When the pad with which the pattern is assigned is hit in the
modes other than the main, the sample assigned by the program is
played back.
A pattern does not work with a simult pad. (Refer to
"MUTE/Simult Pad")
Timing correct does not work to patterns. (A pattern is not
influenced by timing correct)
MIDI CC
If MIDI CC is chosen, a control change will be outputted by
hitting a pad.
Please move cursor to the right and choose the control change
number which you want to output.
Please move cursor to the Data field and set a value.
If a pad A01 is hit in the case of the above figure, a control
change 11 will be outputted with the value of 127.
When On/Off (127/0) is select in the MODE field, if a pad is
pressed, CC will be outputted with a value 127, and if a pad is
released, CC will be outputted with a value 0.
In the case of the above figure, if a pad A01 is pressed, a
control change 11 will be outputted with the value of 127, and if
a pad is released, a control change 11 will be outputted with the
value of 0.
Notes
MIDI CC is outputted only on a main screen.
NOTE is outputted in the modes other than a main screen.
MIDI PC
If MIDI PC is chosen, a program change will be outputted by
hitting a pad.
Please move cursor to the right and choose the program change
number which you want to output.
If a pad A01 is hit in the case of the above figure, program
change No.5 will be outputted.
Notes
MIDI PC is outputted only on a main screen.
NOTE is outputted in the modes other than a main screen.