|Pattern creation mode
If [MODE]+PAD11 is pushed, it will become the
mode which creates the pattern of one bar. (Refer to video OS3) (Refer to video OS128XL)
A sequence cannot be played back in this mode.
Moreover, 16LEVELS does not work.
Since a setting of the main active track is used, when a program is changed, the program of an active track is also changed.
If [PLAY] or the [PLAY START] button is pushed, loop playback of the pattern will be carried out.
When cursor is in the pad field,a pad can be changed by a DATA wheel. (Change is also possible by hitting a pad)
When cursor is in the velocity field, a velocity can be adjusted by a DATA wheel.
Moreover, if AFTER button of Q1 or Q2 is ON(the LED is lit), the velocity of the cursor position can be adjusted with a slider.
If a [SHIFT] + cursor button is pressed when line field has cursor, cursor will move to the parameter field.
For level, MIDI OUT, etc., please set with active track.
The pads or velocity of an odd number position can be adjusted simultaneously, holding F4 (EVN/ODD) button.
All the pads or velocities can be adjusted simultaneously, holding F6 (ALL) button.
If the F3 (SOLO) button is pressed, solo playback is performed on the line where the cursor is located.
If the F2 (MUTE) button is pressed, it mute the line where the cursor is located. (The MUTE button is not in OS3.)