Comparison with OS2XL or OS3

  OS2XL OS3 Light
Setting the time signature
Alternate and Crossfade loop (TRIM)
Non-Destructive Chop
Grid Edit (MODE+PAD15)
FILTER 2
START/END setup of a sample (PROGRAM)
Behavior selection of the Next sequence (END OF BAR START/PLAY)
2-bar loop edit mode (MODE+PAD15)
Loop & hold playback of a sample
Q1 and Q2 are shown in the screen of an audio track.
Chord
Arpeggiator
Splash Screen
Behavior selection of the Next sequence (IMMEDIATELY START/PLAY)
Sequence list
Program list
Track list
Sample list (sorting / deletion of a sample two or more)
FOOTSWITCH (ERASE, REC+START, OVER DUB+START, START/STOP)
FOOTSWITCH (TRACK+, TRACK-, "SEQUENCE+, SEQUENCE-)
Converting a Stereo Sample to Mono (TRIM)
Insert Silence (TRIM)
Bit Convert (TRIM)
Ring Modulation (TRIM)
Combine (TRIM)
Fade-in/out (TRIM)
Pad Locate (Audio Track)
TO NEXT NOTE (SEQ EDIT Edit:DURATION Mode:)
Mix Down (SONG)
Real Time Pitch Shift
Auto Chromatic Assignment
Program for Musical Instruments (Non overlap)
Global Program Edit
MTC/MMC
CLOCK and MTC can be selected with SYNC OUT at the same time
For example, OUT A:CLOCK OUT B:MTC
Grid Edit (In Main Screen)
Simul Pad 2 (Pad of a target is not recorded as an event at the time of recording.)
MIDI/SYNC indicator (MAIN) Refer to manual.
Voice Monitor
Customizable Click/Metronome Sounds
(Adjustment of level and selection of OUT are also possible)
Recordable Track Mutes
Audition in save mode
Q-Link MIDI CC
Start point of a sample in Q-Link NOTE ON
End point of a sample in Q-Link NOTE ON
VELOCITY in Q-Link NOTE ON
PAN in Q-Link NOTE ON
LFO PITCH in Q-Link REAL TIME
LFO FILTR in Q-Link REAL TIME
LFO LEVEL in Q-Link REAL TIME
Set of Q-Link to active track (ALL PAD)
MIDI IN Pitch Bend
MIDI IN (MIDI CC #02 or 74 => Filter Cutoff)
MIDI IN (MIDI CC #71  => Filter resonance)
ADSR ("Light" is INST only)
Portamento
Track Mixer
Adjustment of pad sensitivity
Pad to MIDI out CC/PC
Pad Mute
Program is switched by hitting the pads (NEXT SEQ)
ZERO CROSS (LOOP of TRIM)
Level of NORMALIZE (TRIM)
Change of tracks at a [MODE] + DATA wheel.
Change of a sequence at [NEXT SEQ]+ DATA wheel.
Rearranging the Sequences
Equalizer High and Equalizer Low (Filters)
Wait for key
Strength (Timing Correct)
Level mute (Track Mute)
"New Program name" and "New Folder name" are memorized.
Mix (TRIM) Two samples are mixed
Play marker (TRIM)
Reverse play of a sample (Program mode and TRIM)
Stereo sample is switched to mono (Program mode)
HOLD button (STEP EDIT)
MIDI IN Monitor
Multi timbre
Value of FULL LEVEL can be adjusted.
PACK (A program and samples are packed and it is made one file.)
The length of a loop can be held. (TRIM)
A function is assigned to MIDI NOTE/CC (MPC is operated by a MIDI controller)
Looping recorder mode
5 Tracks display mode
Track Mute Groups (The tracks of the same group will be muted together.)
F5 (DELETE) button exists in LOAD mode.
Simul Sequence (2nd Sequence)
Bars loop Reference video
There is a swing field in the grid
Note On indicator (Track Mute) Refer to video
Pattern
Event recording mode with 808 method (MODE+PAD15)
Pad status display mode
PATCHED PHRASE
Auto Chop (TRIM)
Program for Musical Instruments (Overlap)
Grid Edit (AUDIO)
Simul Pad 1 (Pad of a target is also recorded as an event at the time of recording.)
CHOP in Q-Link NOTE ON
LFO SPEED in Q-Link REAL TIME
TEMPO in Q-Link REAL TIME
MIDI IN (MIDI CC #01 Modulation wheel)
Pad Aftertouch (Program mode)
Sample Layer Crossfade
Line Pattern (GRID)
Hold of a note repeat pad
The value and mixer of a parameter of FX2 are controllable by a MIDI controller.
Customize of MAIN and NUMERIC button
Two or more sample assignment (Audio Track)
Track Velocity%
Repeat hold playback of a sample
The value of a note repeat which is different in each pad can be set up.
The value of CC is controllable by the pressure of a pad. (Pad Mode)
[Play & Chop] button (TRIM) Reference video
TEMPO button (TRIM) The tempo of a phrase sample is detectable. Reference video
Real-time Time stretch / Pitch shift Reference video
X-FADE in Q-Link REAL TIME
EXCLUSIVE SOLO&EXCLUSIVE MUTE (Track Mute Group)
EXCLUSIVE SOLO-2 (Track Mute Group) Reference video
Tracks Edit Mode
Detune (INST PROGRAM [PITCH]) Reference video
INVERT (TRIM)
Voice Priority (PROGRAM)
MIDI FILTER
Copy Bank
LFO Pan (PROGRAM)
Seq.Loop SPP (Sync out)
LR of a stereo sample is changed. (TRIM)
Reversal of LCD can be performed.
HOLD button (PROGRAM) Reference video
Retrigger field to LFO (PROGRAM) Refer to manual. Reference video
FOOTSWITCH (NEXT BANK, BACK BANK) Reference video
View (LOAD)
TRANSPOSE in Q-Link REAL TIME
Improved mode (RECORD)
Improved mode (EFFECT)
Start offset of a sample (Audio Track)
Test mode of a button and LED Reference video
SetBars button (Audio Track)
Recording in tracks edit mode
AHDSR ("Light" is INST only)
Loop by pad (Audio Track) Reference video
The maximum value of Attack of PITCH is 135 Reference video
Maximum Number of Audio Tracks 32 32 32
Number of Sample Layer 3 3
Number of Autoload holder 2 2 2
Maximum of duration 65.000 65.000 65.000
Maximum Number of Programs 129 129 129
Maximum Number of Sequences 99 99 99
Maximum number of bars 999 999 300
Tracks per sequence 64 64 64
Maximum Events (Notes) 300.000 300.000 300.000
  OS2XL OS3 Light