You can choose behavior when a pad is hit.
Please turn a DATA wheel in the pad mode field and choose the mode.
|---||The sample currently assigned to the
pad is played back.
Moreover, MIDI NOTE currently assigned to the pad is outputted with reference to set of the MIDI field.
|PTRN(PATTERN)||The pattern currently assigned to the
pad is played back.
As for the program which sounds a pattern, the program of an active track is used.
Moreover, NOTE used by the pattern is outputted with reference to set of the MIDI field.
|CC(Control change)||MIDI CC currently assigned to the pad is outputted with reference to set of the MIDI field.|
|PC(Program change)||MIDI PC currently assigned to the pad is outputted with reference to set of the MIDI field.|
Please refer to "MUTE/Simult Pad/CYCLE " for CYCL (CYCLE) and RNDM (Cycle Random).
A pattern is played back only in the mode about a main screen and a pattern.
When the pad with which the pattern is assigned is hit in the modes other than the main, the sample assigned by the program is played back.
A pattern does not work with a simult pad. (Refer to "MUTE/Simult Pad/CYCLE")
Timing correct does not work to patterns. (A pattern is not influenced by timing correct)
MIDI CC/PC is outputted only on a main screen. (MIDI NOTE is outputted in the modes other than a main screen.)
You can set the pad mode with a window of "Pad Mode Assign List".
If the [WINDOW] button is pressed when cursor is in the pad mode field, the window of "Pad Mode Assign List" will open.
Please move cursor to mode field and choose the mode.
If F5 (A-ALL) button is pressed, mode of all the pads of BANK A can be chosen as the same time.
ALL will be canceled if F5 (A-ALL) button is pressed once again.
F5 button changes as follows by the PAD BANK key.
When the PAD BANK B key is pressed
When the PAD BANK C key is pressed
When the PAD BANK D key is pressed
Pad mode can be turned ON/OFF if F2 (ON/OFF) button is pressed.
When pad mode is OFF, OFF is displayed on the Set No field.
10 kinds of different setup can be set by choosing a number in the Set No. field.
Saveing of setups
Since the contents of a setting will be lost if the power is turned off, please save them to CF card or HDD.
Please select PAD MODE ASSIGN in the Save field and push F6 (DO IT) button.
If F5 (DO IT) button is pressed, it will be saved by the file name currently displayed.
Extension "PMD" is a file of pad mode.