Comparison with OS2XL

  OS2XL OS3
Ver.1.52
OS3
Ver.2.xx
Splash Screen
Behavior selection of the Next sequence
Sequence list
Program list
Track list
Sample list (sorting / deletion of a sample two or more)
MIDI/SYNC indicator (MAIN)
FOOTSWITCH (ERASE, REC+START, OVER DUB+START, START/STOP)
FOOTSWITCH (TRACK+, TRACK-, "SEQUENCE+, SEQUENCE-)
Alternate loop (TRIM)
Crossfade loop (TRIM)
Converting a Stereo Sample to Mono (TRIM)
Insert Silence (TRIM)
Bit Convert (TRIM)
Ring Modulation (TRIM)
Combine (TRIM)
Fade-in/out (TRIM)
Program PAD mode (TRIM)
Pad Locate (Audio Track)
TO NEXT NOTE (SEQ EDIT Edit:DURATION Mode:)
Mix Down (SONG)
Real Time Pitch Shift
Auto Chromatic Assignment
Program for Musical Instruments (Non overlap)
Global Program Edit
MTC/MMC
CLOCK and MTC can be selected with SYNC OUT at the same time
For example, OUT A:CLOCK OUT B:MTC
Grid Edit (DRUM) ALL PAD Mode
Grid Edit (MIDI)
Grid Edit Control Change
Grid Edit (In Main Screen)
Step sound in Grid
Grid Edit (DRUM) Loop Edit Mode
Simul Pad 2 (Pad of a target is not recorded as an event at the time of recording.)
Master Tempo
TAP TEMPO by Pad
TAP TEMPO by Midi in Note
Voice Monitor
Customizable Click/Metronome Sounds
(Adjustment of level and selection of OUT are also possible)
Recordable Track Mutes
Audition in save mode (Sample in the memory)
Audition in save mode (Sample in CF card or HDD)
Q-Link MIDI CC
Start point of a sample in Q-Link NOTE ON
End point of a sample in Q-Link NOTE ON
VELOCITY in Q-Link NOTE ON
PAN in Q-Link NOTE ON
LFO PITCH in Q-Link REAL TIME
LFO FILTR in Q-Link REAL TIME
LFO LEVEL in Q-Link REAL TIME
Set of Q-Link to active track (ALL PAD)
MIDI IN Pitch Bend
MIDI IN (MIDI CC #02 or 74 => Filter Cutoff)
MIDI IN (MIDI CC #71  => Filter resonance)
ADSR
Portamento
Track Mixer
Adjustment of pad sensitivity
Input Thru
Pad to MIDI out CC/PC
Pad Mute
Program is switched by hitting the pads (NEXT SEQ)
Arpeggiator
ZERO CROSS (LOOP of TRIM)
Movement of pad events
Level of NORMALIZE (TRIM)
Change of tracks at a [MODE] + DATA wheel.
Change of a sequence at [NEXT SEQ]+ DATA wheel.
Rearranging the Sequences
Equalizer High and Equalizer Low (Filters)
Chord
PgmMode (TRIM)
Wait for key
Strength (Timing Correct)
"New Program name" and "New Folder name" are memorized.
Mix (TRIM) Two samples are mixed
Play marker (TRIM)
Reverse play of a sample (Program mode and TRIM)
Stereo sample is switched to mono (Program mode)
Level mute (Track Mute)
HOLD button (STEP EDIT)
MIDI IN Monitor
Multi timbre
Value of FULL LEVEL can be adjusted.
PACK (A program and samples are packed and it is made one file.)
A function is assigned to MIDI NOTE/CC (MPC is operated by a MIDI controller)
Looping recorder mode
5 Tracks display mode
Track Mute Groups (The tracks of the same group will be muted together.)
F5 (DELETE) button exists in LOAD mode.
The length of a loop can be held. (TRIM)
Pattern
Pad status display mode
CYCLE (A sample is switched each time it hits the same pad.)
PATCHED PHRASE
Auto Chop (TRIM)
Program for Musical Instruments (Overlap)
Grid Edit (AUDIO)
Simul Pad 1 (Pad of a target is also recorded as an event at the time of recording.)
CHOP in Q-Link NOTE ON
LFO SPEED in Q-Link REAL TIME
TEMPO in Q-Link REAL TIME
Pitch Bend Sensitivity
MIDI IN (MIDI CC #01 Modulation wheel)
Pad Aftertouch (Program mode)
Sample Layer Crossfade
Line Pattern (GRID)
Hold of a note repeat pad
Loop hold playback of a sample
The value and mixer of a parameter of FX2 are controllable by a MIDI controller.
Customize of MAIN and NUMERIC button
Two or more sample assignment (Audio Track)
Track Velocity%
Simul Sequence (2nd Sequence)
Bars loop Reference video
There is a swing field in the grid
Non-Destructive Chop
EXCLUSIVE SOLO&EXCLUSIVE MUTE (Track Mute Group)
Repeat hold playback of a sample
The value of a note repeat which is different in each pad can be set up.
AHDSR
Tracks Edit Mode
Detune (INST PROGRAM [PITCH]) Reference video
INVERT (TRIM)
Voice Priority (PROGRAM)
MIDI FILTER
Copy Bank
LFO Pan (PROGRAM)
Seq.Loop SPP (Sync out)
LR of a stereo sample is changed. (TRIM)
TEMPO button (TRIM) The tempo of a phrase sample is detectable. Reference video
Random of arpeggiator
The value of CC is controllable by the pressure of a pad. (Pad Mode)
Reversal of LCD can be performed.
HOLD button (PROGRAM) Reference video
Retrigger field to LFO (PROGRAM) Refer to manual. Reference video
FOOTSWITCH (NEXT BANK, BACK BANK) Reference video
View (LOAD)
Real-time Time stretch / Pitch shift Reference video
TRANSPOSE in Q-Link REAL TIME
Improved mode (RECORD)
Chord (Chords can be directly assigned to pads by a MIDI keyboard)
Start offset of a sample (Audio Track)
Simul Pattern
Repeat hold solo playback of a sample
Non-Destructive Slice and Start/End point adjustment of a sample (Program mode)
Pressure (MAIN) The value of a TUNE, FILTER and LFO is controllable by the pressure of a pad.
TRANSPOSE (Pad Mode) The value of a transpose can be set to pads.
Test mode of a button and LED Reference video
A splash screen can be displayed by a test mode.
Recording in tracks edit mode
Pattern creation mode Reference video
[Play & Chop] button (TRIM) Reference video
INST is also possible for "PgmMode".(TRIM) Reference video
A setup of a chord is savable as a file.
X-FADE in Q-Link REAL TIME Reference video
A real-time chops Reference video
EXCLUSIVE SOLO-2 (Track Mute Group) Reference video
Loop by pad (Audio Track) Reference video
SetBars button (Audio Track)
The maximum value of Hold of AMP is 200 Reference video
The maximum value of Attack of PITCH is 135 Reference video
Note On indicator (Track Mute) Refer to video
Save/load to INTERNAL MEMORY
Maximum Number of Audio Tracks 32 32 32
Number of Sample Layers 3 3 3
Number of Autoload holder 2 2 2
Maximum of duration 65.000 65.000 65.000
Maximum Number of Programs 129 129 129
Maximum Number of Sequences 99 99 99
Tracks per sequence 64 64 64
Maximum Events (Notes) 300.000 300.000 300.000
  OS2XL OS3
Ver.1.52
OS3
Ver.2.xx