How to Install Ver3.13. (When MPC1000 of you is blue, it is here.)

1. Download the Ver3.13 from our website to your computer

2. Insert Compact Flash into MPC1000

3. Switch the MPC1000 on

4. Go Load mode, then press F4(USB)

5. Connect a USB cable between PC to MPC1000 (display will change from "Status=Not Connected" to "Status=Connected")

6. PC will mount the CF card of the MPC1000 as a drive on your computer

7. Please copy Ver3.13("mpc1000_jv313.bin") file to CF card from your computer.

8. Once the file has been copied, disconnect the USB cable

9. Please press F1(LOAD) key.

10. Cursor is moved to the File field and the file of Ver3.13 (A photograph is a thing of Ver3.12) is chosen by a DATA wheel.

Since the window of "OS update" will open if F6(DO IT) key is pressed, please press F5(DO IT) key.


Installation of Ver3.13 starts.
When the following window is displayed, it is the completion of installation.


If a power supply is turned off and turned on, Ver3.13 will start.

Notes
It can return to AKAI OS by the same method.

If a pad is hit, when sound does not stop or will be in the state of a note repeat, please set the value of "Pad On Level" as 16 in the sensitivity adjustment mode of pads.