Bug fixes: OS-XL Ver3.44 01-MAY-2014
----------------------------------------------------
1. [Input thru]
When SYSTEM SETUPS set to ON from the state of OFF is loaded, "Input thru" does not work.
2. [TRIM]
F5(CHOP)=> F6(EDIT)
Cursor is strange when a pad is struck in the mode of "Extract".
3. [GRID]
[Loop Edit]
[VIEW]
Even if it presses the STOP button, sound may not stop.
4. [MultiTimbre]
[Soft thru]
AS TRACK does not work other than NOTE.
----------------------------------------------------
Bug fixes: 128XL Ver1.44 01-MAY-2014
----------------------------------------------------
1. [Input thru]
When SYSTEM SETUPS set to ON from the state of OFF is loaded, "Input thru" does not work.
2. [SEQ EDIT]
F2(BARS) => INSERT
It is not possible to reduce the value of "Number of bars".
3. [MultiTimbre]
[Soft thru]
AS TRACK does not work other than NOTE.
--------------------------------------------------
Bug fixes: OS3 Ver1.19 01-MAY-2014
--------------------------------------------------
1. [Input thru]
When SYSTEM SETUPS set to ON from the state of OFF is loaded, "Input thru" does not work.
2. [SEQ EDIT]
F2(BARS) => INSERT
It is not possible to reduce the value of "Number of bars".
3. [MultiTimbre]
[Soft thru]
AS TRACK does not work other than NOTE.
--------------------------------------------------
Addition: Free Ver3.11 02-APR-2014
--------------------------------------------------
"Data Wheel Type" field addition to OTHER.
Please select "2", when an encoder(DATA wheel) is exchanged for the same type as MPC1000.
----------------------------------------------------
Bug fixes: OS-XL Ver3.43 01-APR-2014
----------------------------------------------------
1. [MAIN GRID]
The screen of a grid is strange when a sequence changes by the next sequence. (at the time of a setup to END OF SEQENCE)
2. [GRID MIDI]
When an event is entered with a pad, an event is not inputted with the value of duration set by Q1.
<<Change>>
[SAVE]
Selection of ENTIRE MEMORY was changed into the last.
----------------------------------------------------
Bug fix: 128XL Ver1.43 01-APR-2014
----------------------------------------------------
1. [TR EDIT]
If the bar of the last of all the tracks is deleted, cursor will exceed a right frame.
<<Change>>
[SAVE]
Selection of ENTIRE MEMORY was changed into the last.
--------------------------------------------------
Bug fix: OS3 Ver1.18 01-APR-2014
--------------------------------------------------
1. [TR EDIT]
If the bar of the last of all the tracks is deleted, cursor will exceed a right frame.
<<Change>>
[SAVE]
Selection of ENTIRE MEMORY was changed into the last.
----------------------------------------------------
Bug fixes: 128XL Ver1.42 16-FEB-2014
----------------------------------------------------
1. [INST PROGRAM]
Nothing is displayed in the column of SPAN at the time of the input in the numeric key.
2. [MIDI GRID]
A screen is strange at the time of event elimination using the ERASE key.
3. [TR EDIT]
If F6 (DELETE) button is pressed at the position where there is not a bar, the MPC will freeze
----------------------------------------------------
Bug fixes: OS3 Ver1.17 16-FEB-2014
----------------------------------------------------
1. [INST PROGRAM]
Nothing is displayed in the column of SPAN at the time of the input in the numeric key.
2. [MAIN GRID]
Event of PAD 14-16 is not displayed.
3. [TR EDIT]
If F6 (DELETE) button is pressed at the position where there is not a bar, the MPC will freeze
---------------------------------------------------
Bug fix: OS-XL Ver3.42 16-FEB-2014
---------------------------------------------------
1. [INST PROGRAM]
Nothing is displayed in the column of LOW and HIGH at the time of the input in the numeric key.
----------------------------------------------------
Bug fixes: 128XL Ver1.41 01-FEB-2014
----------------------------------------------------
1. [TRIM]
A play marker remains displayed when the long sample was changed to the sample short during a play.
2. [TRIM PgmMode]
When adjusting St/End, pressing a pad, regardless of the pressure of a pad, audition volume is sounding on the full level.
<<Addition>>
[PROGRAM]
The HOLD button was added to SHIFT+F1.
When HOLD is on, cursor does not move automatically by midi in note.
Reference video
Retrigger field added to the LFO
When this field is set to OFF, it works synchronizing with the pad pressed first. (Only pad that is set LFO of the same type)
Refer to manual.
Reference video
NEXT BANK and BACK BANK are added to FOOTSWITCH.
Reference video
----------------------------------------------------
Bug fixes: OS3 Ver1.16 01-FEB-2014
----------------------------------------------------
1. [TRIM]
A play marker remains displayed when the long sample was changed to the sample short during a play.
2. [PROGRAM]
Cursor may exceed a frame.
3. [TRIM PgmMode]
When adjusting St/End, pressing a pad, regardless of the pressure of a pad, audition volume is sounding on the full level.
<<Addition>>
[PROGRAM]
The HOLD button was added to SHIFT+F1.
When HOLD is on, cursor does not move automatically by midi in note.
Reference video
Retrigger field added to the LFO
When this field is set to OFF, it works synchronizing with the pad pressed first. (Only pad that is set LFO of the same type)
Refer to manual.
Reference video
NEXT BANK and BACK BANK are added to FOOTSWITCH.
Reference video
---------------------------------------------------
Bug fix: OS-XL Ver3.41 16-JAN-2014
---------------------------------------------------
1. [Multi timbre]
Same CC in the same location will record only the last channel.
----------------------------------------------------
Bug fixes: 128XL Ver1.40 16-JAN-2014
----------------------------------------------------
1. [Multi timbre]
Same CC in the same location will record only the last channel.
A mute group works only on an active track.
2. If it is going to overwrite an AUTOLOAD folder, it will be "No Retrun Address!! "will be displayed.
<<Change>>
[PROGRAM]
The copy of a parameter is possible also on the screen of SAMPLE2.
----------------------------------------------------
Bug fixes: OS3 Ver1.15 16-JAN-2014
----------------------------------------------------
1. [Multi timbre]
Same CC in the same location will record only the last channel.
A mute group works only on an active track.
2. If it is going to overwrite an AUTOLOAD folder, it will be "No Retrun Address!! "will be displayed.
<<Change>>
[PROGRAM]
The copy of a parameter is possible also on the screen of SAMPLE2.
--------------------------------------------------
Bug fixes: 128XL Ver1.39 01-JAN-2014
--------------------------------------------------
1. Even if it turns on MPC, holding the ERASE button, the value of "In 2 Offset channel" field is not reset.
2. "Erase" Window
When a multi timbre is ON, a note cannot be chosen by a MIDI keyboard.
3. [TR EDIT]
Display of an event may disappear.
<<Addition>>
[PAD MIXER]
"MIDI In CC Level/Pan" field addition
Refer to manual.
---------------------------------------------------
Bug fixes: OS-XL Ver3.40 01-JAN-2014
---------------------------------------------------
1. Even if it turns on MPC, holding the ERASE button, the value of "In 2 Offset channel" field is not reset.
2. "Erase" Window
When a multi timbre is ON, a note cannot be chosen by a MIDI keyboard.
--------------------------------------------------
Bug fixes: OS3 Ver1.14 01-JAN-2014
--------------------------------------------------
1. Even if it turns on MPC, holding the ERASE button, the value of "In 2 Offset channel" field is not reset.
2. "Erase" Window
When a multi timbre is ON, a note cannot be chosen by a MIDI keyboard.
3. [TR EDIT]
Display of an event may disappear.
<<Addition>>
[OTHER]
"LCD Reverse" field addition
--------------------------------------------------
Addition: OS-XL Ver3.39 04-DEC-2013
--------------------------------------------------
"Data Wheel Type" field addition to OTHER.
Please select "2", when an encoder(DATA wheel) is exchanged for the same type as MPC1000.
-------------------------------------------------
Bug fix: OS3 Ver1.13 04-DEC-2013
-------------------------------------------------
1. The value of MIDI CC may be reset on the way.
<<Addition>>
"Wheel" field addition to OTHER.
Please select "Type-2", when an encoder(DATA wheel) is exchanged for the same type as MPC1000.
-------------------------------------------------
Bug fix: 128XL Ver1.38 04-DEC-2013
-------------------------------------------------
1. The value of MIDI CC may be reset on the way.
<<Addition>>
"Wheel" field addition to OTHER.
Please select "Type-2", when an encoder(DATA wheel) is exchanged for the same type as MPC1000.
-------------------------------------------------
Bug fixes: OS3 Ver1.12 16-NOV-2013
-------------------------------------------------
1. When a multi timbre is ON, notes event cannot be erased by an external keyboard.
2. [PROGRAM]
The position of cursor is not in correspondence with a MIDI in note.
--------------------------------------------------
Bug fix: OS-XL Ver3.38 16-NOV-2013
--------------------------------------------------
1. When a multi timbre is ON, notes event cannot be erased by an external keyboard.
-------------------------------------------------
Bug fix: 128XL Ver1.37 16-NOV-2013
-------------------------------------------------
1. When a multi timbre is ON, notes event cannot be erased by an external keyboard.
--------------------------------------------------
Bug fix: 128XL Ver1.36 01-NOV-2013
--------------------------------------------------
1. [TRIM]
If the stereo sample made by MIX A+B is converted to MONO, MPC will crash.
------------------------------------------------
Bug fix: OS3 Ver1.11 01-NOV-2013
------------------------------------------------
1. [TRIM]
If the stereo sample made by MIX A+B is converted to MONO, MPC will crash.
-------------------------------------------------
Bug fix: OS-XL Ver3.37 01-NOV-2013
-------------------------------------------------
1. [TRIM]
If the stereo sample made by MIX A+B is converted to MONO, MPC will crash.
---------------------------------------------------
Bug fixes: 128XL Ver1.35 16-OCT-2013
---------------------------------------------------
1. [PROGRAM]
If the program of INST is packed, it may sound by ONE SHOT.
2. [SAVE]
The position of the cursor after performing a save may not be right.
------------------------------------------------
Bug fixes: OS3 Ver1.10 16-OCT-2013
------------------------------------------------
1. [PROGRAM]
If the program of INST is packed, it may sound by ONE SHOT.
2. [SONG]
Cursor will overlap with the frame of a bottom in the STEP field.
3. [AUDIO TRACK]
If a lower cursor button is pushed in the SAMPLE field, cursor will disappear.
-------------------------------------------------
Bug fix: OS-XL Ver3.36 16-OCT-2013
-------------------------------------------------
1. [PROGRAM]
If the program of INST is packed, it may sound by ONE SHOT.
-