Bug fixes
| ----------------------------------------------------- Bug fix: OS-XL Ver3.23 01-NOV-2012 ----------------------------------------------------- 1. Even if it changes the value of FULL LEVEL, to MIDI IN, it will always be set to 127. --------------------------------------------------- Bug fix: 128XL Ver1.11 01-NOV-2012 --------------------------------------------------- 1. [SONG] A sequence will be deleted if F4 (CONVERT) is performed. ------------------------------------------------------------------ Bug fixes & Addition: 128XL Ver1.10 20-OCT-2012 ------------------------------------------------------------------ 1. [SONG] The <<BAR>> button does not work. Moreover, the audio track after STEP2 is not played back. 2. [MIDI note/CC To button TRACK-XX] A track cannot be changed in STEP EDIT. 3. [AUDIO TRACK] The sample of the audio track saved by OS-XL is not assigned. Moreover, cursor is strange, when the MIDI field is turned ON and cursor is moved to the left. 4. [STEP EDIT] In the window of "Step Edit Options" The position of "Duration of recorded notes" field is aberration. <<Addition>> 1. [TRIM] SLICE SAMPLE and INVERT are added to EDIT. Moreover, there was a little change to a screen and specification. 2. [GRID] The "Horizontal grid" field is added to the window of "GRID Options". 3. [PROGRAM] A PRIORTY (Voice priority) parameter is added to "AMP". Moreover, there was a little change to a screen and specification. 4. [LOAD] The "View" field is added. OS128XL video ----------------------------------------------------- Bug fixes: OS-XL Ver3.22 01-OCT-2012 ----------------------------------------------------- 1. [REC]+[PLAY START] => [STOP] => [PLAY START] It will hang, if a [NEXT SEQ]+DATA wheel is turned. 2. When the type of a track is AUDIO, a sequence cannot be changed by a [NEXT SEQ]+DATA wheel. 3. [MIDI/SYNC] Even if it press F3 (BEND) button after pressing F6 (SCREEN) button, a screen does not change. --------------------------------------------------- Bug fix: 128XL Ver1.09 01-OCT-2012 --------------------------------------------------- 1. [INST PROGRAM] [OUT] ALL does not work. -------------------------------------------------------------- Bug fix & Addition: 128XL Ver1.08 29-SEP-2012 -------------------------------------------------------------- 1. [Q-link] When a program is INST, it works only to PAD A01. <<Addition>> [INST PROGRAM] A Detune parameter is added to [PITCH]. Refer to manual. Refer to video. <<Change>> The specification of Chord was changed. Refer to manual. Refer to video. -------------------------------------------------------------- Bug fix & Change: 128XL Ver1.07 05-SEP-2012 -------------------------------------------------------------- 1. [EFFECT] Change of the value of EQ1 of MASTER will generate a noise. <<Change>> 1. Screen of EFFECT was changed. --------------------------------------------------------------------- Bug fixes:MPC2500 OS-XL Ver3.21 01-SEP-2012 --------------------------------------------------------------------- 1. [LOOP & HOLD] The sample to which the start point is set may not be played back correctly. 2. [TRIM] Slice of NDC is strange. Moreover, the sound of an audition is not correctly. ---------------------------------------------------- Change: 128XL Ver1.06 26-AUG-2012 ---------------------------------------------------- 1. [MAIN] Repeat field Even 8 bars can set the value of a repeat. 2. [OTHER] Main screen [F1] mode field was added. F1 button can be select as [TR EDIT] or [PadMode]. 3. [DRUM GRID] The screen and specification of LOOP EDIT were changed. Refer to video. 4. [TRIM] St and End were changed into the time display. Refer to video. ---------------------------------------------------- Change: 128XL Ver1.05 13-AUG-2012 ---------------------------------------------------- 1. [DRUM GRID] Completion of Loop Edit Refer to video. <<Change>> The sensitivity adjustment screen of the pad was changed. Refer to video. ---------------------------------------------------- Change: OS128 Ver1.03 10-AUG-2012 ---------------------------------------------------- 1. Screen change of a trim ---------------------------------------------------- Bug fix: 128XL Ver1.04 05-AUG-2012 ---------------------------------------------------- 1. [PATTERN TRACK] A pattern is not entered correctly. ---------------------------------------------------- Bug fix: 128XL Ver1.03 04-AUG-2012 ---------------------------------------------------- 1. TRIM Cross fade loop F3 (CANCEL) button does not work in the window of "Convert X-fade to Normal loop". <<Change>> [MAIN] [GRID] F1 button was changed into F1 (TR EDIT). <<Addition>> INSET and the DELETE button were added to track edit mode. Refer to video. ---------------------------------------------------- Bug fix: 128XL Ver1.02 23-JUL-2012 ---------------------------------------------------- 1. [GRID MIDI] [CC/BEND] Movement of cursor is strange. ---------------------------------------------------- Bug fix: 128XL Ver1.01 21-JUL-2012 ---------------------------------------------------- 1. [GPE] The filter of LFO does not work. --------------------------------------------------------------------- Bug fixes:MPC2500 OS-XL Ver3.20 10-JUL-2012 --------------------------------------------------------------------- 1. [Wait For Key] Count in OFF does not work. 2. [PATTERN] An effect is not reflected. 3. [Q-link] Value of VELOCITY is not recorded. 4. [MIDI Soft thru] OMNI-C, D NOTE OFF is not outputted. --------------------------------------------------------------------- Bug fixes:MPC2500 OS-XL Ver3.19 01-JUN-2012 --------------------------------------------------------------------- 1. [MIDI CLOCK] When the [PLAY] button is pressed, a song position pointer is not outputted. 2. [Registration of patterns] [NAME] The name set immediately before does not become the next default name. 3. [PATTERN] A setup of "Pad to MIDI note out" is not reflected. 4. [FOOTSWITCH] When [F6] is assigned, STOP by a foot switch does not work by a record mode. 5. When the value of the transpose of a pattern is changed during recording, it is recorded without reflecting a transpose. 6. If LOOP & HOLD hit a pad in truck mixer mode during a play, LOOP & HOLD will stop. 7. [TRIM] [Loop ON] When the key is locked, F3 (Zcross) button adjusts a loop point in the window of JOINT, and when a window is closed, the start point of the sample is not linked. 8. [TRIM] An error message will not be displayed but MPC will be reset, when a memory is insufficient and "COMBINE A+B" is performed. 9. [GRID] [MOVE] A bar will be added, when region selection is made to END and an event is moved back. 10. [MIDI/SYNC] [BUTTON] A note cannot be chosen from a controller when a channel is set up. --------------------------------------------------------------------------- Bug fix & Addition :MPC2500 OS-XL Ver3.18 07-APR-2012 --------------------------------------------------------------------------- 1. If the channel of MIDI OUT is changed pressing a pad, the sound of an external sound source will not stop. <<Addition>> 1. CYCLE (A sample is switched each time it hits the same pad.) Refer to manual. Refer to video. 2. Track Mute Groups (The tracks of the same group will be muted together.) Refer to manual. Refer to video. --------------------------------------------------------------------- Bug fixes:MPC2500 OS-XL Ver3.17 15-MAR-2012 --------------------------------------------------------------------- 1. When a multi timbre is ON, a sustain pedal does not work. 2. Midi in note will be pronounced by MONO, even if voice is set to POLY, when a multi timbre is ON. 3. [MAIN] The input of numeric cannot be performed in the set of a loop. 4. [MAIN] When cursor is in the BARS field, change of a sequence cannot be performed even if it turns a DATA wheel, holding the NEX SEQ button. 5. [MAIN] [Next Sequence] [END OF SEQUENCE] Even if it sets a loop and turns OFF, the Next Sequence will be performed by END of the set loop. 6. [PROGRAM] The copy of the pad using the UNDO button cannot be copied to other BANK(s). 7. When the name of the sample assigned by the audio track is changed in a trim, the name of the sample assigned is not changed. 8. [MIDI/SYNC] [BUTTON] When the MIDI device is connected to MIDI IN B, a strange character may be displayed on a screen. --------------------------------------------------------------------- Bug fix:MPC2500 OS-XL Ver3.16 05-FEB-2012 --------------------------------------------------------------------- 1. [GRID] [LOOP EDIT] The event of BANK B-D cannot be deleted. --------------------------------------------------------------------- Bug fixes:MPC2500 OS-XL Ver3.15 02-FEB-2012 --------------------------------------------------------------------- 1. [STEP EDIT] [INSERT] [TEMPO CHANGE] The right end of cursor is blinking. 2. [MAIN GRID] Even if it continues pressing a BAR> button in the bar field, it does not scroll automatically. 3. [Q-link] LFO>FILTER does not work. 4. [5 tracks display mode] 1. In the track selection with a Q2AFTER button and a pad, cursor does not go to the selected track. 2. When F1 is set as LOOP, the cursor after pushing F1 (LOOP) button is strange. 5. [TRIM] When F1 (PgmMode) is set to ON, a sample will be changed, if a pad is hit in the window of "Joint" of a loop and a window is closed. <<Change>> [GRID] During the play of loop edit and line pattern mode, it changed so that ON/OFF of FULL LEVE could not be performed. --------------------------------------------------------------------- Bug fixes:MPC2500 OS-XL Ver3.14 11-JAN-2012 --------------------------------------------------------------------- 1. [PAD MIXER] [CC] [NON-CHANNEL] When PLAY MODE is set as LOOP&HOLD, an external controller cannot adjust pan and level. 2. [5 tracks display mode] When cursor is in the position of a parameter, the track of a parameter is not changed by the track change by MIDI NOTE/CC. 3. Cursor is strange if a track is changed during playback of a sequence. 4. [NEXT SEQ] A program change is not sent when behavior of NEXT SEQ is set as "END OF SEQUENCE". 5. Track selection in the track name field can select only to tracks 1-20. 6. Since the work areas of a memory were insufficient, when the work and operation which need many memories were performed, it sometimes crash or rebooted. -------------------------------------------------------------------------------- Bug fixes & Addition:MPC2500 OS-XL Ver3.13 03-JAN-2012 -------------------------------------------------------------------------------- 1. [GRID] F5(EDIT) If the same event is shifted twice, an original note will remain. 2. [AUDIO TRACK] Even if it press the PLAY START button during recording, re-recording is not carried out. 3. [TRIM] [CHOP] DIVIDE is not possible when SLICE is set to 63. <<Addition>> 1. REC+STOP and DUB+STOP(Wait for key) was added to FOOTSWITCH. 2. 5 tracks display mode addition (MAIN) Refer to manual. ------------------------------------------------------------------ Bug fixes: MPC2500 OS-XL Ver3.12 05-DEC-2011 ------------------------------------------------------------------ 1. The input by number button is not displayed. 2. MUTE will be set to ON by MODE+F5 key. 3. [TRIM] Crossfade loop A noise may be contained if the sample of large size is converted to a forward loop. 4. [AUDIO TRACK] It may differ from the value which the value of the level set. 5. [SAVE] If twice saved by NTIRE MEMORY-2, a "DIRECTORY error" message will be displayed. 6. [SAMPLE LIST] Even if it deletes the sample which is sounding, a sample continues sounding. |