|1||Tempo sauce field||Please refer to "Selecting a tempo source".|
|2||MIDI/SYNC indicator field (OUT)||The information on SYNC sent when MIDI/SYNC was sent is displayed.|
|3||Simul Pattern||Please refer to "Simul Pattern"|
|4||MIDI field||The output channel and port of the
active track are displayed.
Please set up a channel and a port, when you carry out a MIDI output.
|5||Program change field||Please refer to "Output Midi Program Change"|
|6||Note field||The output note number of the pad
chosen is displayed.
Please refer to "A setup of an output MIDI note"
|7||Repeat field||A sample is played back repeatedly.
It works only by the main, 16 pad display mode, and a record mode.
Please set the mode and a repeat interval.
: It will be repeatedly played back until a pad is released.
: It will be repeatedly played back until a pad is hit once again.
: Other sample solo playback is stopped, and it will be repeatedly played back until a pad is hit once again.
When a track is changed during repeat hold playback, sound stops.
|8||Pressure field||Please refer to "Pressure".|
|9||Master effect field||The state of a master effect is displayed. (ON/OFF)|
|10||Effect field||The type of the effect selected is displayed.|
|11||Track mixer||The track mixer is displayed. (Only TRACK 1-16)|
|12||Pad Mode Field||Please refer to "Pad Mode"|
|13||F1(TR EDIT)||Please refer to "Tracks Edit Mode".|
|14||Level meter||INPUT THRU level meter.|
|15||INPUT THRU field||The INPUT THRU state is displayed. (ON/OFF)|
|16||Q-link field||Please refer to "Q-link (MAIN)".|
|17||Multi timbre field (ON/OFF)||Multi timbre OFF = ALL CH ACTV TR
Multi timbre ON = CH1-16 TR1-16
Please refer to "Multi timbre"
|18||MIDI/SYNC indicator field (IN)||The information on SYNC received when MIDI/SYNC was received is displayed.|
|19||Track number field||The number of the active track is displayed.|
|1||SEND level||If cursor is moved to the SEND level
field and a DATA wheel is turned, the SEND level of an
effect can be set.
(It can set, only when REVERB or DELAY is select with the type of an effect.)
|2||Output destination||If cursor is moved to the output
destination field and a DATA wheel is turned, the output
destination of a track can be select.
When you want to apply an effect, please select F1 or F2. (F1=FX1 F2=FX2)
|3||Pan||The pan of a track can be set, if cursor is moved to the pan field and a DATA wheel is turned. (It sets as L50-R50=L9-R9)|
|4||Level||The level of a track can be adjusted, if cursor is moved to the level field and a DATA wheel is turned.|
|5||Track number||It is a number of a track.|
|Start Time||It is a window which sets the starting time of MTC. Please refer to "MMC - MTC - CLOCK"|
|Pad event move to other track||Please refer to "Movement of pad events".|
|SHIFT+F1(P.STATS)||Please refer to Pads status display mode|
|SHIFT+F2(TEST)||Please refer to video. MPC1000 MPC2500|
|SHIFT+F3(STRETCH)||Please refer to Real-time Time stretch / Pitch shift|
|SHIFT+4(LOOPER)||Please refer to Looping recorder|
|SHIFT+F5(P..SHIFT)||Please refer to Real Time Pitch Shift|
|SHIFT+F6(InTHRU)||Please refer to Input thru|