Comparison with OS128ORG

  OS128ORG OS128XL
Ver.1.81
OS128XL
Ver.2.xx
Direct recording
Continuous track
Locate window
Auto phrase loop
Save/load to INTERNAL MEMORY
Improved mode (Name Edit)
Test mode of a button and LED Reference video
Improved mode (SAVE/LOAD)
Improved mode (TRIM)
Improved mode (SLIDER)
Improved mode (MAIN)
Splash Screen
Behavior selection of the Next sequence
Converting a Stereo Sample to Mono (TRIM)
Auto Chromatic Assignment
Grid Edit (DRUM) 16PAD Mode
Grid Edit (In Main Screen)
Step sound in Grid
TAP TEMPO by Pad
Recordable Track Mutes
Audition in save mode (Sample in the memory)
Set of Q-Link to active track (ALL PAD)
Reversal of LCD can be performed.
Sample list (sorting / deletion of a sample two or more) (/) (/) (/)
Customizable Click/Metronome Sounds
You can turn on / off input thru on the main screen
There is an input thru level meter on the main screen
There is an FX field on the main screen
The RecName and Monitor field is in an audio track.
You can change programs on the Pad Mixer screen
Improved mode (RECORD)
Global Program Edit
Adjustment of pad sensitivity
PATCHED PHRASE
Auto Chop (TRIM)
Track Velocity%
There is a Pad Mixer on the main screen
Simul Pattern Refer to manual.(OS128XL)
Pattern Refer to manual.(OS128XL)
Pad status display mode Refer to manual.(OS128XL)
CYCLE (A sample is switched each time it hits the same pad.) Reference video(128XL)
Repeat hold solo playback of a sample Refer to manual.(OS128XL)
Pressure (MAIN) The value of a TUNE, FILTER and LFO is controllable by the pressure of a pad.
TRANSPOSE (Pad Mode) The value of a transpose can be set to pads.
Improved mode (Input Thru) Refer to manual.(OS128XL)
Improved mode (EFFECT)
Sequence list
Program list
Track list
Program list
Behavior selection of Play Start (LOOP)
MIDI/SYNC indicator (MAIN)
FOOTSWITCH (ERASE, REC+START, OVER DUB+START, START/STOP)
FOOTSWITCH (TRACK+, TRACK-, "SEQUENCE+, SEQUENCE-)
Alternate loop (TRIM)
Crossfade loop (TRIM)
Insert Silence (TRIM)
Bit Convert (TRIM)
Ring Modulation (TRIM)
Combine (TRIM)
Fade-in/out (TRIM)
Program PAD mode (TRIM)
Pad Locate (Audio Track)
TO NEXT NOTE (SEQ EDIT Edit:DURATION Mode:)
Mix Down(SONG)
Real Time Pitch Shift
Real-time Time stretch / Pitch shift Refer to manual. Reference video
Program for Musical Instruments (Non overlap) Refer to manual.(OS128XL)
CLOCK and MTC can be selected with SYNC OUT at the same time Refer to manual.(OS128XL)
For example, OUT A:CLOCK OUT B:MTC
Grid Edit (DRUM) ALL PAD Mode (64PAD)
Grid Edit (MIDI)
Grid Edit Control Change Refer to manual.(OS128XL)
Grid Edit (DRUM) Loop Edit Mode Refer to manual.(OS128XL)
Simul Pad (Pad of a target is not recorded as an event at the time of recording.) Refer to manual.(OS128XL)
Master Tempo
TAP TEMPO by Midi in Note
Voice Monitor
Audition in save mode (Sample in CF card or HDD)
Q-Link MIDI CC
Start point of a sample in Q-Link
End point of a sample in Q-Link
Velocity in Q-Link NOTE ON
Pan in Q-Link NOTE ON
LFO PITCH in Q-Link REAL TIME
LFO FILTR in Q-Link REAL TIME
LFO LEVEL in Q-Link REAL TIME
TRANSPOSE in Q-Link REAL TIME
MIDI IN Pitch Bend
MIDI IN (MIDI CC #02 or 74 => Filter Cutoff)
MIDI IN (MIDI CC #71  => Filter resonance)
ADSR
Portamento
Track Mixer Refer to manual.(OS128XL)
Pad to MIDI out CC/PC Refer to manual.(OS128XL)
Pad Mute Refer to manual.(OS128XL)
Program is switched by hitting the pads (NEXT SEQ)
Arpeggiator
ZERO CROSS (LOOP of TRIM)
Movement of pad events
Level of NORMALIZE
Change of tracks at a [MODE] + DATA wheel.
Change of a sequence at [NEXT SEQ]+ DATA wheel.
Customize of MAIN and NUMERIC key. As for OS3 and 128XL, only a numeric key is.
Rearranging the Sequences
Chord
Chord (Chords can be directly assigned to pads by a MIDI keyboard) Reference video(OS128XL)
PgmMode (TRIM)
Wait for key
Strength (Timing Correct)
Level mute (Track Mute)
"New Program name" and "New Folder name" are memorized.
Mix (TRIM) Two samples are mixed
Play marker (TRIM)
Reverse play of a sample (Program mode and Trim)
Stereo sample is switched to mono (Program mode)
HOLD (STEP EDIT)
MIDI IN Monitor
Multi timbre
Value of FULL LEVEL can be adjusted.
PACK (A program and samples are packed and it is made one file.)
Start offset of a sample (Audio Track) Refer to manual.(OS128XL)
The length of a loop can be held. (TRIM)
A function is assigned to MIDI NOTE/CC (MPC is operated by a MIDI controller)
Looping record mode Refer to manual.(OS128XL)
10 Tracks display mode
Track Mute Groups (The tracks of the same group will be muted together.)
EXCLUSIVE SOLO&EXCLUSIVE MUTE (Track Mute Group) Reference video
AHDSR Refer to manual.(OS128XL)
Non-Destructive Slice and Start/End point adjustment of a sample (Program mode) Refer to manual.(OS128XL)
Repeat hold playback of a sample Refer to manual.(OS128XL)
The value of a note repeat which is different in each pad can be set up. Refer to manual.(OS128XL)
Tracks Edit Mode Reference video(OS128XL)
Detune (INST PROGRAM [PITCH]) ]) Reference video
INVERT (TRIM) Refer to manual.(OS128XL)
Voice Priority (PROGRAM) Refer to manual.(OS128XL)
MIDI FILTER Refer to manual.(OS128XL)
Copy Bank Refer to manual.(OS128XL)
LFO PAN (PROGRAM) Reference video
Seq.Loop SPP (Sync out) Reference video
LR of a stereo sample is changed. (TRIM)
TEMPO button (TRIM) The tempo of a phrase sample is detectable. Reference video
Random of arpeggiator
View (LOAD)
The value of CC is controllable by the pressure of a pad.
Equalizer High and Equalizer Low (Filters)
HOLD button (PROGRAM) Reference video
Retrigger field to LFO (PROGRAM) Refer to manual. Reference video
FOOTSWITCH (NEXT BANK, BACK BANK) Reference video
F5 (DELETE) button exists in LOAD mode.
There is a Track Mixer on the main screen
You can turn on / off multi timbre on the main screen
You can change the sequence on the Track Mixer screen
The level value is displayed on the Track Mixer screen
You can change samples on the Pad Mixer screen
The level value is displayed on the Pad Mixer screen
There is Q-link field on Track mute screen
A splash screen can be displayed by a test mode.
SetBars button (Audio Track)
Simul Sequence (2nd Sequence)
X-FADE in Q-Link REAL TIME
Non-Destructive Chop
Bars loop
A setup of a chord is savable as a file.
INST is also possible for "PgmMode".(TRIM)
[Play & Chop] button (TRIM) Reference video
There is a swing field in the grid
Pattern creation mode
Recording in tracks edit mode
A real-time chops Reference video
EXCLUSIVE SOLO-2 (Track Mute Group) Reference video
Loop by pad (Audio Track) Reference video
The maximum value of Hold of AMP is 200 Reference video
The maximum value of Attack of PITCH is 135 Reference video
Reading of S3000 format CD is possible. Refer to video
Note On indicator (Track Mute) Refer to video
Maximum Number of Audio Tracks 4 32 32
Number of Sample Layers 4 3 3
Number of Autoload holder 1 2 2
Maximum of duration 9999 65.000 65.000
Maximum Number of Programs 24 129 129
Maximum Number of Sequences 99 99 99
Tracks per sequence 64 64 64
Maximum Events 100.000 300.000 300.000
  OS128ORG OS128XL
Ver.1.81
OS128XL
Ver.2.xx